#!/bin/bash
#
# Author: Steven Shiau <steven _at_ nchc org tw>
# License: GPL 
# Description:
# This is only for "disk to disk" or "partition to partition" clone.

# it is important to run partimage in save mode with volume=0 so that we
# can send the data to stdout
# This is the basic idea for partimage:
# (partimage -z0 -o -d --volume=0 -B gui=no save /dev/hda1 stdout |
#  partimage -M -f3 -b restore /dev/hdc1 stdin)
# Similar idea for ntfsclone and dd.
# partclone has a better function, i.e. option "-b" allows to do local partition to partition clone without having piping.
ocs="$(basename $0)"
VOL_ZERO="0"
#create image volumes with a size of X, 
# ignore the MBR by using -M, we will ignore the error caused by devfs style
# in /proc/partitions
DEFAULT_STDOUT_PARTIMAGE_SAVE_OPT="-M -z0 -o -d -b -c -B gui=no --volume=$VOL_ZERO"
DEFAULT_STDIN_PARTIMAGE_RESTORE_OPT="-M -f3 -b"
# port for netcat
NC_PORT_DEFAULT="9000"

# flag to use partclone or not
# ///NOTE/// 2008/May/11 by Steven Shiau: local part to remote part still has a problem with partclone: e.g. local hda1 to remote hda3, due to the filesystem of source partition can not be informed to target machine in the current mechanism, it will fail if the filesystem is not the same with the list on $src_pt_info. 
# Something like: partclone.reiserfs can't restore from the image which filesystem is XFS not REISERFS
USE_NTFSCLONE_IN_OCS_ONTHEFLY="no"
USE_PARTCLONE_IN_OCS_ONTHEFLY="yes"
# Sector to sector copy program. Available progs are: dd, partclone
S2S_CLONE_PROG_IN_OCS_ONTHEFLY="partclone"

# Load DRBL setting and functions
DRBL_SCRIPT_PATH="${DRBL_SCRIPT_PATH:-/opt/drbl/}"

. $DRBL_SCRIPT_PATH/sbin/drbl-conf-functions
. $DRBL_SCRIPT_PATH/conf/drbl-ocs.conf
. $DRBL_SCRIPT_PATH/sbin/ocs-functions

# Load the config in ocs-live.conf. This is specially for Clonezilla live. It will overwrite some settings of /opt/drbl/conf/drbl-ocs.conf, such as $DIA...
[ -e "/etc/ocs/ocs-live.conf" ] && . /etc/ocs/ocs-live.conf

# local functions:
# check if the user input /dev/hda, /dev/hdb...
check_input_param() {
  # return code 3 = disk, return code 5 = partition
  local input_src="$1"
  local recode
  case "$input_src" in
       [hs]d[a-z])
         recode=3
         ;;
       [hs]d[a-z][0-9]*)
         recode=5
         ;;
       *)
        echo "\"$input_src\" $msg_is_unknown_HD... $msg_program_stop!"
	echo -n "$msg_press_enter_to_continue"
        read
        exit 1
  esac
  return $recode
} # end of check_input_param
#
check_pt_then_run_create_part_table() {
  local dsk_chk_tmp
  local disk_size_sec to_seek
  echo "$msg_creating_partition_in_target"
  if [ -f "$tgt_parted_info" ]; then
    if [ "$batch_mode" = "on" ]; then
      fdisk_ans="yes"
    else
      continue_fdisk=""
      while [ -z "$continue_fdisk" ]; do
        [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
        echo "$msg_are_u_sure_u_want_to_continue $msg_if_go_on_the_data_will_be_erased_then_confirm"
        [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
        echo -n "[y/n] "
        read continue_fdisk
        case "$continue_fdisk" in
             y|Y|[yY][eE][sS])
                fdisk_ans="yes"
                echo "$msg_ok_let_do_it!"
                ;;
             n|N|[nN][oO])
                fdisk_ans="no"
                clean_tmp_dirs
                echo "$msg_program_stop!"
                exit 1
                ;;
             *)
                [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
                echo "$msg_you_have_to_enter_yes_or_no!"
                [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
                echo $msg_delimiter_star_line
                ;;
        esac
      done
    fi
    case "$fdisk_ans" in
      [yY]|[yY][eE][sS])
         # Turn off swap and LVM2, unlock the busy partitions.
         turn_off_swap_and_LVM2
         # From the output file of parted, we can decide if the partition is gpt or mbr
         if [ -n "$(grep -iE "^Partition Table:" $tgt_parted_info 2>/dev/null | grep -iE "gpt")" ]; then
           # The type is GPT
	   echo "Creating primary GPT info on /dev/$target_hd..."
           LC_ALL=C dd if=$tgt_1st_gpt of=/dev/$target_hd bs=512 count=34 &>/dev/null
           # 2nd GPT
           echo "Creating the secondary GPT to /dev/$target_hd..."
           disk_size_sec="$(LC_ALL=C parted -s /dev/$target_hd unit s print | grep -E "^Disk /dev/" | awk -F":" '{print $2}' | sed -e "s/s$//g")"
           to_seek="$((${disk_size_sec}-33+1))"
           LC_ALL=C dd if=$tgt_2nd_gpt of=/dev/$target_hd seek=${to_seek} bs=512 count=33 &>/dev/null

           #
           echo "Informing the OS that partition table has changed..."
           partprobe /dev/$target_hd
	   sfdisk -R /dev/$target_hd
	   sleep 2
           echo "$msg_the_partition_in_the_system_now:"
           echo $msg_delimiter_star_line
	   LC_ALL=C parted -s /dev/$target_hd print
           echo $msg_delimiter_star_line
         else
           # The type is MBR
	   echo "Creating MBR type's partition table..."
           case "$create_part_type" in
 	    "proportion")
               [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
 	      echo "Create the proportional partition table based on $tgt_pt_tmp and the size of /dev/$target_hd..."
               [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
	      # We use environmental variable EXTRA_SFDISK_OPT so it can be used in ocs-expand-mbr-pt
	      EXTRA_SFDISK_OPT=""
	      [ -n "$sfdisk_opt" ] && EXTRA_SFDISK_OPT="$sfdisk_opt"
	      EXTRA_SFDISK_OPT="$EXTRA_SFDISK_OPT" ocs-expand-mbr-pt --batch $tgt_pt_tmp /dev/$target_hd
 	      ;;
 	    "manual")
 	      echo "$msg_enter_another_shell_for_fdisk"
               echo -n "$msg_press_enter_to_continue..."
               read
               /bin/bash
 	      ;;
             *)
               # Create partition table by sfdisk and [hs]d[a-z]-pt.sf
               echo "sfdisk $sfdisk_opt /dev/$target_hd < $tgt_pt_tmp"
               LC_ALL=C sfdisk $sfdisk_opt /dev/$target_hd < $tgt_pt_tmp
               RETVAL="$?"
               echo "This is done by \"sfdisk $sfdisk_opt /dev/$target_hd < $tgt_pt_tmp\""
	       #
               echo "Informing the OS that partition table has changed..."
               partprobe /dev/$target_hd
	       sfdisk -R /dev/$target_hd
	       sleep 2
               # Add another checking mechanism by parted, since sfdisk with -f won't return correct code.
               echo "Checking the integrity of partition table in the disk /dev/$target_hd... "
               dsk_chk_tmp="$(mktemp /tmp/ocs_dskchk_tmp.XXXXXX)"
               LC_ALL=C parted -s /dev/$target_hd print &> $dsk_chk_tmp
               rc=$?
               if [ "$rc" -gt 0 ]; then
                 [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
                 echo "$msg_the_partition_table_in_disk_is_illegal: /dev/$target_hd"
                 echo "$msg_is_this_disk_too_small ?"
                 [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
                 if [ -e "$dsk_chk_tmp" ]; then
                   echo "$msg_error_messages_from_parted_are:"
                   echo $msg_delimiter_star_line
                   cat $dsk_chk_tmp
                   echo $msg_delimiter_star_line
                   rm -f $dsk_chk_tmp
                 fi
                 [ -d "$dsk_chk_tmp" -a -n "$(echo $dsk_chk_tmp | grep "ocs_dskchk_tmp")" ] && rm -rf $dsk_chk_tmp
                 echo "$msg_program_stop!"
                 exit 1
	       fi
               [ -d "$dsk_chk_tmp" -a -n "$(echo $dsk_chk_tmp | grep "ocs_dskchk_tmp")" ] && rm -rf $dsk_chk_tmp
 	      ;;
 	   esac
         fi
         ;;
      *)
         if [ "$partition_table_exist_in_target" = "no" ]; then
           [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
           echo "No partition table exists in /dev/$target_hd, and you choose not to create partition table in /dev/$target_hd! We can not go on without partition table in /dev/$target_hd!!!"
           [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
           echo "$msg_program_stop!"
           exit 1
         fi
         echo "$msg_ok_we_will_keep_old_partition_table"
         ;;
    esac
  else
    [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
    echo "$msg_fail_to_create_partition_table_in_target_dev: /dev/$tgt_dev! $msg_program_stop!!"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
  fi
  echo 'done!'
} # end of check_pt_then_run_create_part_table
#
nc_lp_check() {
  NC_LOCAL_PORT_OPT=
  nc_tmp="$(mktemp /tmp/nc_tmp.XXXXXX)"
  # check if command is nc or netcat
  if which nc &>/dev/null; then
     NC_CMD="nc"
  elif which netcat &>/dev/null; then
     NC_CMD="netcat"
  else
     [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
     echo "Unable to find command netcat or nc!!! Program terminated!"
     [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
     exit 1
  fi

  LC_ALL=C $NC_CMD -h 2> $nc_tmp
  if [ -n "$(grep -Ei "^[[:space:]]*-p port[[:space:]]+local port number" $nc_tmp)" ]; then
     # This is the version Hobbit wrote (http://www.vulnwatch.org/netcat/)
     # The reason we want to add -q 0 for Hobbit version is that:
     # in Debian, if -q 0 is not set, it will wait forever... nc will not quit.
     # However, in FC3 or ealier version, there is no -q option. nc will quit
     # when EOF.
     [ -n "$(grep "\-q secs" $nc_tmp 2>/dev/null)" ] && NC_QUIT_OPT="-q 0"
     NC_LOCAL_PORT_OPT="$NC_QUIT_OPT -p"
  elif [ -n "$(grep -Ei "^[[:space:]]*-p port[[:space:]]+Specify local port for remote connects" $nc_tmp)" ]; then
     # This is the version Eric Jackson wrote (http://www.monkey.org/~shinobi)
     NC_LOCAL_PORT_OPT=""
  fi
  if [ -n "$(grep -Ei "^[[:space:]]*-d[[:space:]]+Detach from stdin" $nc_tmp)" ]; then
     # if -d is not assigned, it will try to read stdin data, which will cause some problem like this, since it's in the while loop, and while read something from stdin, and nc will also get that if -d is not added:
     # while read logv filesystem; do
     #   nc 192.168.120.2 9006 | lzop -dc | partimage -M -f3 -b -B gui=no restore $logv stdin
     # done < $logv_pse_con
     NC_CLIENT_EXTRA_OPT="-d"
  fi
  [ -f "$nc_tmp" ] && rm -f $nc_tmp
  echo "Using \"-l $NC_LOCAL_PORT_OPT port\" when it's netcat listen mode."
} # end of nc_lp_check

#
kill_clone_prog_nc_process() {
  local i
  echo "Terminate partimage and $NC_CMD processs if they exist..."
  for i in partclone partimage ntfsclone dd $NC_CMD; do
    echo "pkill -u root $i"  && pkill -u root $i
  done
} # end of kill_clone_prog_nc_process
#
clone_boot_loader_in_target() {
echo "$msg_delimiter_star_line"
if [ "$CLONE_BOOT_LOADER" = "yes" ] && [ "$source_type" = "disk" ] && [ "$mode" = "local" -o "$STATUS" = "clone_client" ]; then
  if [ "$batch_mode" = "on" ]; then
    mbr_ans="y"
  else
    [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
    echo "$msg_do_you_want_to_clone_the_boot_loader_to: $tgt_dev ?"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
    echo -n "[Y/n] "
    read mbr_ans
  fi
  case "$mbr_ans" in
    n|N|[nN][oO])
       echo "OK, $msg_skip_clone_boot_loader."
       ;;
    *)
       if [ "$mode" = "local" ]; then
         echo "Cloning the boot loader (executable code area) from \"$source_hd\" to \"$target_hd\"..."
         # boot loader is the first 446 Bytes, the rest part is partition table.
         dd if=/dev/$source_hd of=/dev/$target_hd bs=446 count=1 &> /dev/null
         ret=$?
       elif [ "$STATUS" = "clone_client" ]; then
         echo "Cloning the boot loader (executable code area) from that in $SOURCE_IP to \"$target_hd\"..."
         # boot loader is the first 446 Bytes, the rest part is partition table.
         dd if=$hd_tgt_tmp/src-mbr of=/dev/$target_hd bs=446 count=1 &> /dev/null
         ret=$?
       fi
       if [ "$ret" -ge 1 ]; then
         [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
         echo "$msg_failed_to_clone_the_boot_loader: \"$target_hd\"!!!"
         echo "$msg_program_stop!!"
         [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
         exit 1
       fi
       ;;
  esac
fi
} # end of clone_boot_loader_in_target
#
create_partition_table_in_target(){
if [ "$create_part" != "no" ]; then
  echo "$msg_delimiter_star_line"
  if [ "$mode" = "local" -o "$STATUS" = "clone_client" ]; then 
    # try to see if the partition table exists in the target 
    #if [ -n "$(LC_ALL=C fdisk -l /dev/$target_hd 2>/dev/null | grep -E "/dev/[sh]d[a-z][0-9]+")" ] ; then
    if [ -n "$(LC_ALL=C grep -Eo "$target_hd[[:digit:]]+" /proc/partitions)" ]; then
      partition_table_exist_in_target="yes"
    else
      partition_table_exist_in_target="no"
    fi
    check_pt_then_run_create_part_table
    # After partition table is created, we can dump the hidden data which is between MBR and 1st partition.
    # Exclude GPT type of disk. We only deal with MBR for this hidden data
    if [ -z "$(LC_ALL=C parted -s /dev/$target_hd print | grep -iE "^Partition Table:" | grep -iE "gpt")" ]; then 
      echo "$msg_delimiter_star_line"
      if [ "$clone_hidden_data" = "yes" ]; then
        restore_hidden_data_after_MBR $target_hd $tgt_hidden_img
      fi
      echo "$msg_delimiter_star_line"
    fi
  fi
fi
} # end of create_partition_table_in_target
#
confirm_do_it_in_target_dev() {
  local DEV_MODEL machine_name dev_model_shown
  if [ "$mode" = "local" -o "$STATUS" = "clone_client" ]; then
    get_disk_or_part_hardware_info "$target_hd"
    [ -z "$DEV_MODEL" ] && DEV_MODEL="No_description"
    machine_name="$(dmidecode -s system-product-name 2>/dev/null | head -n 1)"
    if [ -z "$machine_name" -o "$machine_name" = "To Be Filled By O.E.M." ]; then
      dev_model_shown="Machine: Unknown product name"
    else
      dev_model_shown="Machine: $machine_name"
    fi
    echo "$msg_target_dev_has_this_partition_table:"
    # try to see if the partition table exists in the target 
    echo "$msg_delimiter_star_line"
    echo "$dev_model_shown"
    echo "/dev/$target_hd: $DEV_MODEL"
    LC_ALL=C parted -s /dev/$target_hd print
    echo "$msg_delimiter_star_line"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
    echo "$msg_uppercase_Warning!!! $msg_uppercase_Warning!!! $msg_uppercase_Warning!!!"
    echo "$msg_uppercase_Warning! $msg_all_data_in_dev_will_be_overwritten: $tgt_dev"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
    if [ "$batch_mode" != "on" ]; then
      continue_choice=""
      while [ -z "$continue_choice" ]; do
        [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
        echo "$msg_are_u_sure_u_want_to_continue ?"
        [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
        echo -n "[y/n] "
        read continue_ans
        case "$continue_ans" in
             y|Y|[yY][eE][sS])
                continue_choice="yes"
                echo "$msg_ok_let_do_it!"
                ;;
             n|N|[nN][oO])
                continue_choice="no"
                clean_tmp_dirs
                echo "$msg_program_stop!"
                exit 1
                ;;
             *)
                [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
                echo "$msg_you_have_to_enter_yes_or_no!"
                [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
                echo $msg_delimiter_star_line
                ;;
        esac
      done
    fi
  fi
} # end of confirm_do_it_in_target_dev
#
local_lvm_clone_warning() {
  if [ "$part_fs" = "lvm" ]; then
    [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
    echo "Local LVM clone is not well supported, since in the same system, no two same PV UUID can co-exist. Use dd to do sector-to-sector copy. On the other hand, a workaround is available. You can use network clone using two separate machines in clonezilla to avoid this problem. For more details, check http://clonezilla.org for more details. "
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
  fi
} # end of local_lvm_clone_warning
#
prepare_local_clone_dev_info() {
  local_tmp="$(mktemp -d /tmp/ocs_onthefly_local.XXXXXX)"
  local pt_type src_disk_size_sec src_to_skip
  # since it's local, target tmp dir is the same one with local_tmp
  hd_src_tmp="$local_tmp"
  hd_tgt_tmp="$local_tmp"
  # For source disk
  src_pt_tmp="$hd_src_tmp/src_pt.sf"
  src_dsk_mbr="$hd_src_tmp/src-mbr"
  src_dsk_chs="$hd_src_tmp/src-chs.sf"
  src_pt_info="$hd_src_tmp/source_partition.info"
  src_parted_info="$hd_src_tmp/src_pt.parted"
  src_1st_gpt="$hd_src_tmp/src-gpt-1st.img"
  src_2nd_gpt="$hd_src_tmp/src-gpt-2nd.img"
  # hidden data is between mbr and 1st partition.
  src_hidden_img="$hd_src_tmp/src-hidden-data.img"  
  # For target disk
  tgt_pt_tmp="$hd_tgt_tmp/tgt_pt.sf"
  tgt_dsk_mbr="$hd_tgt_tmp/${target_hd}-mbr"
  tgt_dsk_chs="$hd_tgt_tmp/${target_hd}-chs.sf"
  tgt_pt_info="$hd_tgt_tmp/target_partition.info"
  tgt_parted_info="$hd_tgt_tmp/tgt_pt.parted"
  tgt_1st_gpt="$hd_tgt_tmp/tgt-gpt-1st.img"
  tgt_2nd_gpt="$hd_tgt_tmp/tgt-gpt-2nd.img"
  # hidden data is between mbr and 1st partition.
  tgt_hidden_img="$hd_tgt_tmp/tgt-hidden-data.img"

  local part_in_hd swap_in_hd

  # Note! In Ubuntu 6.10, sfdisk output abnormal format for >= 10 partitions, like
  #...
  #/dev/hda9 : start=  1277703, size=   196497, Id=83
  #/dev/hda10: start=  1474263, size=   196497, Id=83
  #/dev/hda11: start=  1670823, size=   196497, Id=83
  #/dev/hda12: start=  1867383, size= 14909202, Id=83
  # Therefor later we have to use  "sed -e "s/:$//g" to clean that.
  #
  # Here we want to output the filesystem of partition to be refered by client.
  # Ex:
  # /dev/hda1 reiserfs
  # /dev/hda2 ext3

  LC_ALL=C parted -s /dev/$source_hd unit s print > $src_parted_info

  # From the output file of parted, we can decide if the partition is gpt or mbr
  if [ -n "$(LC_ALL=C grep -iE "^Partition Table:" $src_parted_info 2>/dev/null | grep -iE "gpt")" ]; then
    pt_type="gpt"
  else
    pt_type="mbr"
  fi

  # No matter it's MBR or GPT, we use sfdisk to dump partition table since if dual boot (Mac OS, Linux) on Mac book, this partition table is required for Linux normally.
  # MBR
  LC_ALL=C dd if=/dev/$source_hd of=$src_dsk_mbr count=1 bs=512 &> /dev/null
  LC_ALL=C sfdisk -d /dev/$source_hd > $src_pt_tmp 2>/dev/null

  # The output of CHS is ${source_hd}-chs.sf
  output_HD_CHS $source_hd $hd_tgt_tmp/ 2>/dev/null
  mv -f $hd_tgt_tmp/${source_hd}-chs.sf $src_dsk_chs
  if [ "$pt_type" = "mbr" ]; then
    # If it's not GPT, we save the hidden data after MBR and before 1st partition for later use.
    if [ "$clone_hidden_data" = "yes" ]; then
      save_hidden_data_after_MBR $source_hd $src_hidden_img
    fi
  fi

  # GPT
  if [ "$pt_type" = "gpt" ]; then
    echo "Saving the primary GPT of /dev/$source_hd as $src_1st_gpt by dd..."
    LC_ALL=C dd if=/dev/$source_hd of=$src_1st_gpt bs=512 count=34
    echo "Saving the secondary GPT of /dev/$source_hd as $src_2nd_gpt by dd..."
    src_disk_size_sec="$(LC_ALL=C parted -s /dev/$source_hd unit s print | grep -E "^Disk /dev/" | awk -F":" '{print $2}' | sed -e "s/s$//g")"
    src_to_skip="$((${src_disk_size_sec}-33+1))"
    LC_ALL=C dd if=/dev/$source_hd of=$src_2nd_gpt skip=${src_to_skip} bs=512 count=33
  fi

  echo $msg_delimiter_star_line
  # Here we should use /proc/partitions instead of partition table since GPT won't be in the output of sfdisk
  # major minor  #blocks  name
  #
  #   8     0  156290904 sda
  #   8     1   92526336 sda1
  #   8     2    9767520 sda2
  #   8     3    1951897 sda3
  #   8     4          1 sda4
  #   8     5   52042536 sda5
  #   8    16  244198584 sdb
  #   8    17  244196001 sdb1
  #for part in `grep -i "Id=" $pt_tmp | cut -d" " -f1 | sed -e "s/:$//g"`; do
  part_in_hd="$(LC_ALL=C grep -Eo "$source_hd[[:digit:]]+" /proc/partitions)"
  for part in $part_in_hd; do
    echo "Collecting partition /dev/$part info..."
    filesystem="$(LC_ALL=C ocs-get-part-info /dev/$part filesystem)"
    pt_size="$(LC_ALL=C ocs-get-part-info /dev/$part size)"
    if [ -n "$filesystem" ]; then
      # If filesystem is empty (e.g. Extended partitoin, parted will show it as empty), skip this.
      echo "/dev/$part $filesystem $pt_size" >> $src_pt_info
    fi
  done
  # SWAP partition info, maybe more than 1
  #for partition in `cat $pt_tmp | grep "Id=82" | cut -d" " -f1 | sed -e 's/\/dev\///g'`
  swap_in_hd="$(awk -F" " '/swap/ {print $1}' $src_pt_info | sed -e 's|/dev/||g')"
  for partition in $swap_in_hd; do
    echo "Outputing swap UUID/LABEL of $partition..."
    # change the target swap partition, like hda2 -> hdb2
    target_swap_part_info="$(echo swappt-${partition}.info | sed -e "s|[hs]d[a-z]|$target_hd|g")"
    output_swap_partition_uuid_label /dev/$partition $local_tmp/$target_swap_part_info
  done
  # change the dev to target in the $pt_tmp and $pt_info
  [ -f "$src_pt_tmp" ] && cp -f $src_pt_tmp $tgt_pt_tmp
  [ -f "$src_parted_info" ] && cp -f $src_parted_info $tgt_parted_info
  [ -f "$src_pt_info" ] && cp -f $src_pt_info $tgt_pt_info
  [ -f "$src_1st_gpt" ] && cp -f $src_1st_gpt $tgt_1st_gpt
  [ -f "$src_2nd_gpt" ] && cp -f $src_2nd_gpt $tgt_2nd_gpt
  [ -f "$src_hidden_img" ] && cp -f $src_hidden_img $tgt_hidden_img
  [ -f "$src_dsk_mbr" ] && cp -f $src_dsk_mbr $tgt_dsk_mbr
  [ -f "$src_dsk_chs" ] && cp -f $src_dsk_chs $tgt_dsk_chs
  [ -e "$tgt_pt_tmp" ] && LC_ALL=C perl -pi -e "s|/dev/[hs]d[a-z]|/dev/$target_hd|g" $tgt_pt_tmp
  [ -e "$tgt_parted_info" ] && LC_ALL=C perl -pi -e "s|/dev/[hs]d[a-z]|/dev/$target_hd|g" $tgt_parted_info
  [ -e "$tgt_pt_info" ] && LC_ALL=C perl -pi -e "s|/dev/[hs]d[a-z]|/dev/$target_hd|g" $tgt_pt_info

  # Decide use_HD_CHS_from_EDD
  # From use_HD_CHS_from_EDD_pref we will decide if use_HD_CHS_from_EDD is yes or no. The rule is if we find the target disk does _NOT_ contain grub boot loader, set use_HD_CHS_from_EDD as yes, others, set it as no. This is because we will re-run grub-install by deafult.
  if [ "$use_HD_CHS_from_EDD_pref" = "yes" ]; then
    if [ -z "$(LC_ALL=C strings $hd_tgt_tmp/${target_hd}-mbr | grep -i "grub")" ]
    then 
      # It's not grub boot loader, set use_HD_CHS_from_EDD as yes
      echo "Non-grub boot loader found on $hd_tgt_tmp/${target_hd}-mbr..."
      echo "The CHS value of hard drive from EDD will be used for sfdisk."
      use_HD_CHS_from_EDD="yes"
    fi
  fi
  # get sfdisk_opt if load_HD_CHS_from_img is yes
  if [ "$use_HD_CHS_from_EDD" = "yes" ]; then
    rawhead=""
    rawsector=""
    rawcylinder=""
    get_RawCHS_of_HD_from_EDD /dev/$target_hd
    if [ -n "$rawhead" -a -n "$rawsector" -a -n "$rawcylinder" ]; then
      sfdisk_opt="$sfdisk_opt -C $rawcylinder -H $rawhead -S $rawsector"
    else
      echo "No CHS value was found from EDD info for disk /dev/$target_hd."
    fi
  elif [ "$load_HD_CHS_from_img" = "yes" ]; then
    # Append the CHS to variable "$sfdisk_opt" if CHS can be find in the image dir.
    load_HD_geometry_opt_from_image $hd_tgt_tmp/ $target_hd
  fi
} # end of prepare_local_clone_dev_info
#
prepare_network_clone_dev_info() {
  # This function is for server and client both. It depends on $STATUS is clone_server or clone_client
  local DEV VG UUID LOGV
  local part_in_hd swap_in_hd s_swpname t_swpname
  #
  if [ "$STATUS" = "clone_server" ]; then
    hd_src_tmp="$(mktemp -d /tmp/ocs_onthefly_src.XXXXXX)"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
    echo "$msg_this_is_for_source_machine."
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
    echo "source_type=$source_type" > $hd_src_tmp/target_type.ocs_onthefly
    cat $hd_src_tmp/target_type.ocs_onthefly | $NC_CMD -l $NC_LOCAL_PORT_OPT $NC_PORT &
    NC_PORT=$((NC_PORT + 2))
  elif [ "$STATUS" = "clone_client" ]; then
    hd_tgt_tmp="$(mktemp -d /tmp/ocs_onthefly_tgt.XXXXXX)"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
    echo "$msg_this_is_for_target_machine"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
    $NC_CMD $NC_CLIENT_EXTRA_OPT $SOURCE_IP $NC_PORT > $hd_tgt_tmp/target_type.ocs_onthefly
    NC_PORT=$((NC_PORT + 2))
    . $hd_tgt_tmp/target_type.ocs_onthefly
    source_type=$source_type
  fi
  # Check now, just in case
  if [ "$STATUS" = "clone_server" ]; then
    if [ "$source_type" = "disk" -a -z "$source_hd" ]; then
      [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
      echo "Source type is disk, but source disk name (Ex. hda) can NOT be found!"
      echo "$msg_program_stop!"
      [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
      echo -n "$msg_press_enter_to_continue"
      read
      clean_tmp_dirs
      exit 1
    fi
  elif [ "$STATUS" = "clone_client" ]; then
    if [ "$target_type" = "disk" -a -z "$target_hd" ]; then
      [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
      echo "Target type is disk, but target disk name (Ex. hdb) can NOT be found!"
      echo "$msg_program_stop!"
      [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
      echo -n "$msg_press_enter_to_continue"
      read
      clean_tmp_dirs
      exit 1
    fi
  fi
  if [ "$STATUS" = "clone_server" ]; then
    src_pt_tmp="$hd_src_tmp/src_pt.sf"
    src_dsk_mbr="$hd_src_tmp/src-mbr"
    src_dsk_chs="$hd_src_tmp/src-chs.sf"
    src_pt_info="$hd_src_tmp/src_partition.info"
    src_parted_info="$hd_src_tmp/src_pt.parted"
    src_1st_gpt="$hd_src_tmp/src-gpt-1st.img"
    src_2nd_gpt="$hd_src_tmp/src-gpt-2nd.img"
    src_hidden_img="$hd_src_tmp/src_hidden-data.img"

    # partition table
    # Note! In Ubuntu 6.10, sfdisk output abnormal format for >= 10 partitions, like
    #...
    #/dev/hda9 : start=  1277703, size=   196497, Id=83
    #/dev/hda10: start=  1474263, size=   196497, Id=83
    #/dev/hda11: start=  1670823, size=   196497, Id=83
    #/dev/hda12: start=  1867383, size= 14909202, Id=83
    # Therefor later we have to use  "sed -e "s/:$//g" to clean that.
    LC_ALL=C parted -s /dev/$source_hd unit s print > $src_parted_info

    # From the output file of parted, we can decide if the partition is gpt or mbr
    if [ -n "$(LC_ALL=C grep -iE "^Partition Table:" $src_parted_info 2>/dev/null | grep -iE "gpt")" ]; then
      pt_type="gpt"
    else
      pt_type="mbr"
    fi

    # No matter it's MBR or GPT, we use sfdisk to dump partition table since if dual boot (Mac OS, Linux) on Mac book, this partition table is required for Linux normally.
    # MBR
    LC_ALL=C dd if=/dev/$source_hd of=$src_dsk_mbr count=1 bs=512 &> /dev/null
    LC_ALL=C sfdisk -d /dev/$source_hd > $src_pt_tmp 2>/dev/null

    # The output of CHS is ${source_hd}-chs.sf
    output_HD_CHS $source_hd $hd_src_tmp/
    mv -f $hd_src_tmp/${source_hd}-chs.sf $src_dsk_chs
    # If it's not GPT, we save the hidden data after MBR and before 1st partition for later use.
    if [ "$pt_type" = "mbr" ]; then
      if [ "$clone_hidden_data" = "yes" ]; then
        save_hidden_data_after_MBR $source_hd $src_hidden_img
      fi
    fi

    # GPT
    if [ "$pt_type" = "gpt" ]; then
      echo "Saving the primary GPT of /dev/$source_hd as $src_1st_gpt by dd..."
      LC_ALL=C dd if=/dev/$source_hd of=$src_1st_gpt bs=512 count=34
      echo "Saving the secondary GPT of /dev/$source_hd as $src_2nd_gpt by dd..."
      src_disk_size_sec="$(LC_ALL=C parted -s /dev/$source_hd unit s print | grep -E "^Disk /dev/" | awk -F":" '{print $2}' | sed -e "s/s$//g")"
      src_to_skip="$((${src_disk_size_sec}-33+1))"
      LC_ALL=C dd if=/dev/$source_hd of=$src_2nd_gpt skip=${src_to_skip} bs=512 count=33
    fi


    echo $msg_delimiter_star_line
    # output the filesystem of partition to be refered by client. Ex:
    # /dev/hda1 reiserfs
    # /dev/hda2 ext3
    # Here we should use /proc/partitions instead of partition table since GPT won't be in the output of sfdisk
    # major minor  #blocks  name
    #
    #   8     0  156290904 sda
    #   8     1   92526336 sda1
    #   8     2    9767520 sda2
    #   8     3    1951897 sda3
    #   8     4          1 sda4
    #   8     5   52042536 sda5
    #   8    16  244198584 sdb
    #   8    17  244196001 sdb1
    #for part in `grep -i "Id=" $pt_tmp | cut -d" " -f1 | sed -e "s/:$//g"`; do
    part_in_hd="$(LC_ALL=C grep -Eo "$source_hd[[:digit:]]+" /proc/partitions)"
    for part in $part_in_hd; do
      echo "Collecting partition /dev/$part info..."
      filesystem="$(LC_ALL=C ocs-get-part-info /dev/$part filesystem)"
      pt_size="$(LC_ALL=C ocs-get-part-info /dev/$part size)"
      echo "/dev/$part $filesystem $size" >> $hd_src_tmp/src_partition.info
    done
    # SWAP partition info, maybe more than 1
    #for partition in `cat $pt_tmp | grep "Id=82" | cut -d" " -f1 | sed -e 's/\/dev\///g'`
    swap_in_hd="$(awk -F" " '/swap/ {print $1}' $hd_src_tmp/src_partition.info | sed -e 's|/dev/||g')"
    for partition in $swap_in_hd; do
      echo "Outputing swap UUID/LABEL..."
      output_swap_partition_uuid_label /dev/$partition $hd_src_tmp/swappt-${partition}.info
    done
    # LVM
    PV_PARSE_CONF="$hd_src_tmp/lvm_vg_dev.list"
    LOGV_PARSE_CONF="$hd_src_tmp/lvm_logv.list"
    ocs-lvm2-start
    echo "Parsing LVM layout..."
    pvscan | grep lvm2 | while read LINE; do
      DEV=`echo $LINE | tr -s ' ' | cut -d' ' -f2`
      VG=`echo $LINE | tr -s ' ' | cut -d' ' -f4`
      # DEV is like /dev/hda2
      # We just want to keep the chosen source dev
      # The results in $PV_PARSE_CONF is like:
      # ----------------------------------------------------
      # vg /dev/hda2 qdlt6U-M4bo-xExy-XG9Q-U7pg-bOXN-n54i5Y
      # ----------------------------------------------------
      # Ex: target: hda1 hda2 hda3, DEV maybe: /dev/hda2
      if [ -n "$(echo "$DEV" | grep -E "$source_hd")" ]; then
        UUID="$(pvdisplay $DEV | grep "PV UUID" | awk -F" " '{print $3}')"
        echo "$VG $DEV $UUID" | tee -a $PV_PARSE_CONF
      fi
    done
    
    if [ -e "$PV_PARSE_CONF" ]; then
      # We just want the LV in chosen target
      echo "Parsing logical volumes..."
      # lvscan results are like:
      # ACTIVE            '/dev/vg3/lvol0' [1.20 GB] inherit
      # ACTIVE            '/dev/vg3/lvol1' [648.00 MB] inherit
      # ACTIVE            '/dev/vg/lvol0' [1.50 GB] inherit
      # ACTIVE            '/dev/vg/lvol1' [500.00 MB] inherit
      #                         ^^ The VG
      
      # find LV for chosen PV.
      lvscan | grep "/.*/" | while read LINE; do
        LOGV=`echo $LINE |tr -s ' ' | cut -d' ' -f2 | tr -d "'"`
        # LOGV is like: /dev/vg3/lvol0
        while read vg dev uuid; do
         # only keep LOGV is in the chosen vg
         if [ -n "$(echo $LOGV | grep -E "/dev/$vg/" 2>/dev/null)" ]; then
          file_system="$(LC_ALL=C ocs-get-part-info $LOGV filesystem)"
          echo "$LOGV $file_system" | tee -a $LOGV_PARSE_CONF
	  # if it's swap, output the labe and uuid only.
	  case "$file_system" in 
            *[Ss][Ww][Aa][Pp]*)
              fn="$(echo $LOGV | sed -e "s|^/dev/||" -e "s|/|-|g")"
              output_swap_partition_uuid_label $LOGV $hd_src_tmp/swappt-${fn}.info
              continue ;;
            *extended*) 
              continue ;;
          esac
          break
         fi 
        done < $PV_PARSE_CONF
      done
      
      # Backup the vg conf
      echo "Saving the VG config... "
      while read vg dev uuid; do
        vgcfgbackup -f $hd_src_tmp/lvm_$vg.conf $vg 2>/dev/null
      done < $PV_PARSE_CONF
      echo "done!"
    fi
    cat <<-ADVAN_PARAM_END > $hd_src_tmp/advanced_param.conf
source_hd="$source_hd"
batch_mode="$batch_mode" 
install_grub="$install_grub"
grub_partition="$grub_partition" 
change_ntfs_boot_chs="$change_ntfs_boot_chs"
ntfs_boot_partition="$ntfs_boot_partition"
use_HD_CHS_from_EDD_pref="$use_HD_CHS_from_EDD_pref"
create_part="$create_part" 
create_part_type="$create_part_type"
CLONE_BOOT_LOADER="$CLONE_BOOT_LOADER" 
resize_partition="$resize_partition" 
load_HD_CHS_from_img="$load_HD_CHS_from_img" 
nogui="$nogui" 
verbose="$verbose" 
clone_hidden_data="$clone_hidden_data"
ADVAN_PARAM_END
    ocs-lvm2-stop
    # pack all the info files
    ( 
      cd $hd_src_tmp/
      tar czf ocs-onthefly-info.tgz *
    )
    # wait for client to download it
    cat $hd_src_tmp/ocs-onthefly-info.tgz | $NC_CMD -l $NC_LOCAL_PORT_OPT $NC_PORT &
    NC_PORT=$((NC_PORT + 2))
  elif [ "$STATUS" = "clone_client" ]; then
    # partition table and info
    # For source dik
    src_pt_tmp="$hd_tgt_tmp/src_pt.sf"
    src_pt_info="$hd_tgt_tmp/src_partition.info"
    src_parted_info="$hd_tgt_tmp/src_pt.parted"
    src_1st_gpt="$hd_tgt_tmp/src-gpt-1st.img"
    src_2nd_gpt="$hd_tgt_tmp/src-gpt-2nd.img"
    src_hidden_img="$hd_tgt_tmp/src_hidden-data.img"
    src_dsk_mbr="$hd_tgt_tmp/src-mbr"
    src_dsk_chs="$hd_tgt_tmp/src-chs.sf"
    # For target dik
    tgt_pt_tmp="$hd_tgt_tmp/tgt_pt.sf"
    tgt_pt_info="$hd_tgt_tmp/tgt_partition.info"
    tgt_parted_info="$hd_tgt_tmp/tgt_pt.parted"
    tgt_1st_gpt="$hd_tgt_tmp/tgt-gpt-1st.img"
    tgt_2nd_gpt="$hd_tgt_tmp/tgt-gpt-2nd.img"
    tgt_hidden_img="$hd_tgt_tmp/tgt_hidden-data.img"
    tgt_dsk_mbr="$hd_tgt_tmp/${target_hd}-mbr"
    tgt_dsk_chs="$hd_tgt_tmp/${target_hd}-chs.sf"

    # Get the pt and mbr... from server
    $NC_CMD $NC_CLIENT_EXTRA_OPT $SOURCE_IP $NC_PORT > $hd_tgt_tmp/ocs-onthefly-info.tgz
    NC_PORT=$((NC_PORT + 2))
    if [ ! -f "$hd_tgt_tmp/ocs-onthefly-info.tgz" ]; then
      [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
      echo "The partition table, MBR infomation is not received from another machine (IP address $SOURCE_IP)!"
      echo "$msg_program_stop"
      [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
      exit 1
    fi
    ( 
      cd $hd_tgt_tmp/
      tar -xzf ocs-onthefly-info.tgz
    )
    # read advanced param passed from server
    . $hd_tgt_tmp/advanced_param.conf

    # swap partition info
    for iswap in $hd_tgt_tmp/swappt-*.info; do
      # $hd_tgt_tmp/swappt-${partition}.info
      s_swpname="$(basename $iswap)"
      if [ "$target_hd" != "$source_hd" ]; then
        t_swpname="$(echo $s_swpname | sed -e "s|-[hs]d[a-z]|-$target_hd|g")"
        cp -f $hd_tgt_tmp/$s_swpname $hd_tgt_tmp/$t_swpname
      fi
    done

    # change the dev to target in the $pt_tmp nd $pt_info
    [ -f "$src_pt_tmp" ] && cp -f $src_pt_tmp $tgt_pt_tmp
    [ -f "$src_parted_info" ] && cp -f $src_parted_info $tgt_parted_info
    [ -f "$src_pt_info" ] && cp -f $src_pt_info $tgt_pt_info
    [ -f "$src_1st_gpt" ] && cp -f $src_1st_gpt $tgt_1st_gpt
    [ -f "$src_2nd_gpt" ] && cp -f $src_2nd_gpt $tgt_2nd_gpt
    [ -f "$src_hidden_img" ] && cp -f $src_hidden_img $tgt_hidden_img
    [ -f "$src_dsk_mbr" ] && cp -f $src_dsk_mbr $tgt_dsk_mbr
    [ -f "$src_dsk_chs" ] && cp -f $src_dsk_chs $tgt_dsk_chs
    [ -e "$tgt_pt_tmp" ] && LC_ALL=C perl -pi -e "s|/dev/[hs]d[a-z]|/dev/$target_hd|g" $tgt_pt_tmp
    [ -e "$tgt_pt_info" ] && LC_ALL=C perl -pi -e "s|/dev/[hs]d[a-z]|/dev/$target_hd|g" $tgt_pt_info
    [ -e "$tgt_parted_info" ] && LC_ALL=C perl -pi -e "s|/dev/[hs]d[a-z]|/dev/$target_hd|g" $tgt_parted_info

    # Decide use_HD_CHS_from_EDD
    # From use_HD_CHS_from_EDD_pref we will decide if use_HD_CHS_from_EDD is yes or no. The rule is if we find the target disk does _NOT_ contain grub boot loader, set use_HD_CHS_from_EDD as yes, others, set it as no. This is because we will re-run grub-install by deafult.
    if [ "$use_HD_CHS_from_EDD_pref" = "yes" ]; then
      if [ -z "$(LC_ALL=C strings $hd_tgt_tmp/${target_hd}-mbr | grep -i "grub")" ]
      then
        # It's not grub boot loader, set use_HD_CHS_from_EDD as yes
        echo "Non-grub boot loader found on $hd_tgt_tmp/${target_hd}-mbr..."
        echo "The CHS value of hard drive from EDD will be used for sfdisk."
	use_HD_CHS_from_EDD="yes"
      fi
    fi
    # get sfdisk_opt if load_HD_CHS_from_img is yes
    if [ "$use_HD_CHS_from_EDD" = "yes" ]; then
      rawhead=""
      rawsector=""
      rawcylinder=""
      get_RawCHS_of_HD_from_EDD /dev/$target_hd
      if [ -n "$rawhead" -a -n "$rawsector" -a -n "$rawcylinder" ]; then
        sfdisk_opt="$sfdisk_opt -C $rawcylinder -H $rawhead -S $rawsector"
      else
        echo "No CHS value was found from EDD info for disk /dev/$target_hd."
      fi
    elif [ "$load_HD_CHS_from_img" = "yes" ]; then
      # Append the CHS to variable "$sfdisk_opt" if CHS can be find in the image dir.
      load_HD_geometry_opt_from_image $hd_tgt_tmp/ $target_hd
    fi
  fi
} # end of prepare_network_clone_dev_info
#
force_to_dd_clone_local_part() {
  case "$S2S_CLONE_PROG_IN_OCS_ONTHEFLY" in 
   dd)
    echo "Filesystem in $src_p is not well supported. Use dd to clone..."  
    dd_img_info_tmp="$(mktemp /tmp/dd_info.XXXXXX)"
    pt_size="$(LC_ALL=C ocs-get-part-info $tgt_p size)"
    trigger_dd_status_report $tgt_p $pt_size &
    dd_report_sig_pid=$!
    start_time="$(date +%s%N)"
    LC_ALL=C dd bs=1M if=$src_p of=$tgt_p 2>&1 | tee $dd_img_info_tmp
    ret=$?
    end_time="$(date +%s%N)"
    kill -9 $dd_report_sig_pid &>/dev/null
    get_dd_image_info $dd_img_info_tmp $start_time $end_time
    [ -f "$dd_img_info_tmp" ] && rm -f $dd_img_info_tmp
    ;;
   partclone)
    echo "Using partclone to clone the file system sector by sector..."  
    partclone.dd $PARTCLONE_RESTORE_ONTHEFLY_OPT -b -s $src_p -O $tgt_p
    ret=$?
    ;;
  esac
}
#
local_partition_to_partiton_clone() {
  local pt_fs="$1"
  local src_p="$2"  # src_p is like /dev/hda1
  local tgt_p="$3"  # tgt_p is like /dev/hdb1
  local pt_size ret dd_img_info_tmp dd_report_sig_pid start_time end_time partition
  if [ -z "$pt_fs" -o -z "$src_p" -o -z "$tgt_p" ]; then
    echo "Wrong options in local_partition_to_partiton_clone!!!"
    echo "$msg_program_stop!"
    exit 1
  fi
  [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
  echo "Source partition file system is $pt_fs..."
  [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL

  echo "Cloning the $src_p to $tgt_p..."
  clean_filesystem_header_in_partition $tgt_p
  # From partimage 0.6.6, batch mode won't stop if checkInodeForDevice is not run. Therefore comment it.
  # checkInodeForDevice $tgt_p
  # Before we start to clone, check if kernel can find /dev/$partition
  partition="$(basename $tgt_p)"
  if [ -z "$(grep -Ew "$partition" /proc/partitions 2>/dev/null)" ]; then
    [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
    echo "$msg_failed_to_find_this_partition: /dev/$partition"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
    echo $msg_delimiter_star_line
    echo "The /proc/partitions in this system:"
    cat /proc/partitions
    echo $msg_delimiter_star_line
    [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
    echo "$msg_the_partition_table_does_not_exist_option"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
    echo -n "$msg_press_enter_to_continue..."
    read
    continue
  fi
  echo "$msg_delimiter_star_line"
  if [ "$FORCE_TO_USE_DD" = "yes" ]; then
    force_to_dd_clone_local_part
  elif [ "$USE_NTFSCLONE_IN_OCS_ONTHEFLY" = "yes" ] && [ "$pt_fs" = "ntfs" ]; then
    echo "Using ntfsclone to clone..."  
    check_ntfs_partition_integrity $src_p
    ntfsclone --save-image --output - $src_p 2>/dev/null | \
    ntfsclone $ntfsclone_progress_option --restore-image --overwrite $tgt_p -
    ret=$?
  elif [ "$USE_PARTCLONE_IN_OCS_ONTHEFLY" = "yes" ] && `is_partclone_support_fs $pt_fs`; then
    # Ex: partclone.reiserfs -b -s /dev/hda3 -O /dev/hdc1
    echo "Using partclone to clone..."  
    partclone.${pt_fs} $PARTCLONE_RESTORE_ONTHEFLY_OPT -b -s $src_p -O $tgt_p
    ret=$?
  elif `is_partimage_support_fs $pt_fs`; then
    echo "Using partimage to clone..."  
    partimage $DEFAULT_STDOUT_PARTIMAGE_SAVE_OPT save $src_p stdout 2> /dev/null | \
    partimage $DEFAULT_STDIN_PARTIMAGE_RESTORE_OPT $PARTIMAGE_RESTORE_ONTHEFLY_OPT restore $tgt_p stdin
    ret=$?
  else
    local_lvm_clone_warning
    # Unknown file system, use dd or partclone.dd	   
    force_to_dd_clone_local_part
  fi
  echo "$msg_delimiter_star_line"
  if [ "$ret" -ge 1 ]; then
     echo "Failed to clone $src_p to $tgt_p!!!"
     echo "$msg_program_stop!!"
     exit 1
  fi
} # end of local_partition_to_partiton_clone
#
local_dev_clone() {
  # TODO!
  # local LVM clone not yet. The difficulty is in the same system, VG can not use the same UUID. If we clone hda to hdb, VG in hda will have same UUID with that in hdb. Therefore in this function, dd is the last choice temporarily.
  case "$source_type" in
    partition)
       part_fs="$(grep -Ew "/dev/$src_dev" $src_pt_info | awk -F" " '{print $2}')"
       if [ -z "$part_fs" ]; then
          [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
	  echo "No file system was found in /dev/$src_dev!"
          [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
          local_partition_to_partiton_clone unknown /dev/$src_dev /dev/$tgt_dev
       else
          local_partition_to_partiton_clone $part_fs /dev/$src_dev /dev/$tgt_dev
       fi
       ;;
    disk)
       echo $msg_delimiter_star_line
       BACKUP_DEVS=""
       echo "Searching for data partition(s) in source disk: $source_hd ..."
       get_known_partition_proc_format $source_hd data
       echo $msg_delimiter_star_line
       target_part_list="$(echo $BACKUP_DEVS | sed -e "s/$source_hd/$target_hd/g")"
       #for target_part in `get_known_partition_sf_format $pt_tmp`; do
       for target_part in $target_part_list; do
         # we need to know the source partition, so replace it, ex. hdc1 -> hda1
         # Ex: target_part: hdc1, hddev: hdc, part_no: 1, src_part: hda1
         hddev=${target_part:0:3}
         part_no=${target_part:3}
         src_part=$( echo $target_part | sed -e "s/$hddev/$source_hd/g" )
         part_fs="$(grep -Ew "/dev/$target_part" $tgt_pt_info | awk -F" " '{print $2}')"
         if [ -z "$part_fs" ]; then
            [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
            echo "No file system was found in /dev/$src_part!"
            [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
            local_partition_to_partiton_clone unknown /dev/$src_part /dev/$target_part
         else
            local_partition_to_partiton_clone $part_fs /dev/$src_part /dev/$target_part
         fi
       done
       ;;
  esac
} # end of local_dev_clone
#
feed_dev_in_server() {
  local pt_fs="$1"
  local src_p="$2"  # src_p is like /dev/hda1
  local ret
  echo "Feeding partition $src_p in listen mode with port $NC_PORT..."
  if [ "$USE_NTFSCLONE_IN_OCS_ONTHEFLY" = "yes" ] && [ "$pt_fs" = "ntfs" ]; then
    echo "Using ntfsclone to clone..."  
    check_ntfs_partition_integrity $src_p
    ntfsclone --save-image --output - $src_p 2>/dev/null | \
    $filter_comp | $NC_CMD -l $NC_LOCAL_PORT_OPT $NC_PORT &
    ret=$?
  elif [ "$USE_PARTCLONE_IN_OCS_ONTHEFLY" = "yes" ] && `is_partclone_support_fs $pt_fs`; then
    # Ex: partclone.reiserfs -c -s /dev/hda3 -o -
    echo "Using partclone to clone..."  
    partclone.${pt_fs} -c -s $src_p -o - 2>/dev/null | \
    $filter_comp | $NC_CMD -l $NC_LOCAL_PORT_OPT $NC_PORT &
    ret=$?
  elif `is_partimage_support_fs $pt_fs`; then
    echo "Using partimage to clone..."  
    [ "$verbose" = "on" ] && echo "partimage $DEFAULT_STDOUT_PARTIMAGE_SAVE_OPT save $src_p stdout 2> /dev/null | $filter_comp | $NC_CMD -l $NC_LOCAL_PORT_OPT $NC_PORT &"
    partimage $DEFAULT_STDOUT_PARTIMAGE_SAVE_OPT save $src_p stdout 2> /dev/null | \
    $filter_comp | $NC_CMD -l $NC_LOCAL_PORT_OPT $NC_PORT &
    ret=$?
  else
    case "$S2S_CLONE_PROG_IN_OCS_ONTHEFLY" in 
     dd)
      echo "Filesystem in $src_p is not well supported. Use dd to clone..."  
      LC_ALL=C dd bs=1M if=$src_p | \
      $filter_comp | $NC_CMD -l $NC_LOCAL_PORT_OPT $NC_PORT &
      ret=$?
      ;;
     partclone)
      echo "Filesystem in $src_p is not well supported. Use partclone.dd to clone..."  
      # Ex: partclone.reiserfs -c -s /dev/hda3 -o -
      echo "Using partclone to clone..."  
      partclone.dd -c -s $src_p -o - 2>/dev/null | \
      $filter_comp | $NC_CMD -l $NC_LOCAL_PORT_OPT $NC_PORT &
      ret=$?
      ;;
    esac
  fi
  echo "$msg_delimiter_star_line"
  if [ "$ret" -ge 1 ]; then
     echo "Failed to feeding partition $src_p in this server!!!"
     echo "$msg_program_stop!!"
     exit 1
  fi
} # end of feed_dev_in_server
#
receive_partition_from_server_then_write() {
  local	pt_fs="$1"
  local tgt_p="$2"  # tgt_p is like /dev/hda1
  local ret pt_size
  echo "$msg_delimiter_star_line"
  echo "Restoring $tgt_p from $SOURCE_IP:$NC_PORT..."
  clean_filesystem_header_in_partition $tgt_p
  # From partimage 0.6.6, batch mode won't stop if checkInodeForDevice is not run. Therefore comment it.
  # checkInodeForDevice $tgt_p
  echo "$msg_delimiter_star_line"
  if [ "$USE_NTFSCLONE_IN_OCS_ONTHEFLY" = "yes" ] && [ "$pt_fs" = "ntfs" ]; then
    echo "Using ntfsclone to clone..."  
    $NC_CMD $NC_CLIENT_EXTRA_OPT $SOURCE_IP $NC_PORT | $filter_decomp | \
    ntfsclone $ntfsclone_progress_option --restore-image --overwrite $tgt_p -
    ret=$?
  elif [ "$USE_PARTCLONE_IN_OCS_ONTHEFLY" = "yes" ] && `is_partclone_support_fs $pt_fs`; then
    # Ex: partclone.reiserfs -s - -o /dev/hdc1
    echo "Using partclone.restore to clone..."  
    $NC_CMD $NC_CLIENT_EXTRA_OPT $SOURCE_IP $NC_PORT | $filter_decomp | \
    partclone.restore $PARTCLONE_RESTORE_ONTHEFLY_OPT -s - -o $tgt_p
    ret=$?
  elif `is_partimage_support_fs $pt_fs`; then
    echo "Using partimage to clone..."  
    [ "$verbose" = "on" ] && echo "$NC_CMD $NC_CLIENT_EXTRA_OPT $SOURCE_IP $NC_PORT | $filter_decomp | partimage $DEFAULT_STDIN_PARTIMAGE_RESTORE_OPT $PARTIMAGE_RESTORE_ONTHEFLY_OPT restore $tgt_p stdin"
    $NC_CMD $NC_CLIENT_EXTRA_OPT $SOURCE_IP $NC_PORT | $filter_decomp | \
    partimage $DEFAULT_STDIN_PARTIMAGE_RESTORE_OPT $PARTIMAGE_RESTORE_ONTHEFLY_OPT restore $tgt_p stdin
    ret=$?
  else
    # Unknown file system, use dd or partclone.restore  
    case "$S2S_CLONE_PROG_IN_OCS_ONTHEFLY" in 
     dd)
      echo "Filesystem in $src_p is not well supported. Use dd to clone..."  
      pt_size="$(grep -Ew "$tgt_p" $tgt_pt_info | awk -F" " '{print $3}')"
      trigger_dd_status_report $tgt_p $pt_size &
      $NC_CMD $NC_CLIENT_EXTRA_OPT $SOURCE_IP $NC_PORT | $filter_decomp | \
      LC_ALL=C dd bs=1M of=$tgt_p
      ret=$?
      ;;
     partclone)
      echo "Using partclone.restore to do sector-by-sector clone..."  
      $NC_CMD $NC_CLIENT_EXTRA_OPT $SOURCE_IP $NC_PORT | $filter_decomp | \
      partclone.restore $PARTCLONE_RESTORE_ONTHEFLY_OPT -s - -o $tgt_p
      ret=$?
      ;;
    esac
  fi
  if [ "$ret" -ge 1 ]; then
     echo "Failed to clone remote image to $tgt_p!!!"
     echo "$msg_program_stop!!"
     exit 1
  fi
} # end of receive_partition_from_server_then_write
#
feed_partition_or_lv_in_server() {
  local pt_fs="$1"
  local src_p="$2" # src_p is like hda1
  local lv volg is_in_chosen_partition fs
  # $NC_PORT & $LOGV_PARSE_CONF are global variables.
  [ -z "$pt_fs" ] && echo "pt_fs not found in function feed_partition_or_lv_in_server!" && exit 1
  [ -z "$src_p" ] && echo "src_p not found in function feed_partition_or_lv_in_server!" && exit 1
  if [ -z "$(echo "$pt_fs" | grep -i lvm)" ]; then
    feed_dev_in_server $pt_fs /dev/$src_p
    # use the next port to avoid being occupied.
    NC_PORT=$((NC_PORT + 2))
  else
    ocs-lvm2-start
    # To avoid the stdin/stdout with ntfsclone/partimage/partclone (feed_dev_in_server $fs $lv) conflicting with "while read", here we must use different file descriptor (3)
    exec 3< $LOGV_PARSE_CONF
    while read -u 3 lv fs; do
     # Process the real data partition, only those in the chosen partitions
     # Ex:
     # /dev/vg3/lvol0  Linux rev 1.0 ext3 filesystem data (large files)
     # Then lvol0 is belong to VG vg3
     volg="$(echo "$lv" | awk -F"/" '{print $3}')"
     # Find if the LV is in the chosen partition (via VG, we can determine that)
     # EX: tgt_parts: hda1, hda3, hda5...
     #     vg3 /dev/hda3 nPMQQ0-D2yN-YRHL-9fBM-0cUm-vgcw-DCUTri
     is_in_chosen_partition="no"
     for ipt in $src_p; do
       if [ -n "$(grep -E "[[:space:]]+/dev/$ipt[[:space:]]+" $PV_PARSE_CONF | grep -E "\<$volg\>")" ]; then
         # Found the chosen partitions is in the VG
         is_in_chosen_partition="yes"
         break
       fi
     done
     [ "$is_in_chosen_partition" = "no" ] && continue
     # if it's swap, output the labe and uuid only.
     case "$fs" in 
       *[Ss][Ww][Aa][Pp]*|*extended*)
         continue ;;
     esac
     feed_dev_in_server $fs $lv
     # use the next port to avoid being occupied.
     NC_PORT=$((NC_PORT + 2))
    done
    exec 3<&-
  fi
} # end of feed_partition_or_lv_in_server() {
#
receive_partition_or_lv_in_client() {
 local pt_fs="$1"
 local tgt_p="$2" # tgt_p is like hda1
 local vg dev uuid lv fs fn uuid_opt label_opt pv_pse_con logv_pse_con lvm_tmp
 # $NC_PORT & $hd_tgt_tmp are global variables.
 if [ -z "$(echo "$pt_fs" | grep -i lvm)" ]; then
   receive_partition_from_server_then_write $pt_fs /dev/$tgt_p
   # use the next port to avoid being occupied.
   NC_PORT=$((NC_PORT + 2))
 else
   pv_pse_con="$hd_tgt_tmp/lvm_vg_dev.list"
   logv_pse_con="$hd_tgt_tmp/lvm_logv.list"
   [ ! -f "$pv_pse_con" ] && echo "$pv_pse_con NOT found!" && exit 1
   [ ! -f "$logv_pse_con" ] && echo "$logv_pse_con NOT found!" && exit 1
   ocs-lvm2-stop

   # Clean the filesystem header in partition where PV exists
   # This is an insurance, since later when we use partimage/ntfsclone to clone, it will not overwrite file header in that partition, it will only overwrite the data in LV. Then parted, blkid will give wrong info.
   while read lv fs; do
    # Process the real data partition, only those in the chosen partitions
    # Ex:
    # /dev/vg3/lvol0  Linux rev 1.0 ext3 filesystem data (large files)
    # Then lvol0 is belong to VG vg3
    volg="$(echo "$lv" | awk -F"/" '{print $3}')"
    # Find if the LV is in the chosen partition (via VG, we can determine that)
    # EX: tgt_parts: hda1, hda3, hda5...
    #     vg3 /dev/hda3 nPMQQ0-D2yN-YRHL-9fBM-0cUm-vgcw-DCUTri
    is_in_chosen_partition="no"
    for ipt in $tgt_p; do
      if [ -n "$(grep -E "[[:space:]]+/dev/$ipt[[:space:]]+" $pv_pse_con | grep -E "\<$volg\>")" ]; then
        # Found the chosen partitions is in the VG
        clean_filesystem_header_in_partition /dev/$ipt
      fi
    done
   done < $logv_pse_con

   lvm_tmp="$(mktemp -d /tmp/ocs_lvm_tmp.XXXXXX)"
   # create PV first
   echo "Creating the PV... "
   while read vg dev uuid; do
     cp -f $hd_tgt_tmp/lvm_$vg.conf $lvm_tmp/  # Since mmap function maybe not available on remote disk (Ex. image is on samba disk). We have to copy the config file to local disk. Thanks to Gerald HERMANT <ghermant _at_ astrel fr> for reporting this bugs.
     #pvcreate -ff --yes --uuid $uuid $dev
     pvcreate -ff --yes --uuid $uuid --zero y --restorefile $lvm_tmp/lvm_$vg.conf $dev
     rm -f $lvm_tmp/lvm_$vg.conf
   done < $pv_pse_con
   echo "done!"

   # Restore the vg conf
   echo "Restoring the VG config... "
   while read vg dev uuid; do
     cp -f $hd_tgt_tmp/lvm_$vg.conf $lvm_tmp/  # Since mmap function maybe not available on remote disk (Ex. image is on samba disk). We have to copy the config file to local disk. Thanks to Gerald HERMANT <ghermant _at_ astrel fr> for reporting this bugs.
     # vgcfgrestore -f $hd_tgt_tmp/lvm_$vg.conf $vg 2>/dev/null
     vgcfgrestore -f $lvm_tmp/lvm_$vg.conf $vg 2>/dev/null
     rm -f $lvm_tmp/lvm_$vg.conf
   done < $pv_pse_con
   [ -d "$lvm_tmp" -a -n "$(echo $lvm_tmp | grep "ocs_lvm_tmp")" ] && rm -rf $lvm_tmp
   echo "done!"

   ocs-lvm2-start
   # To avoid the stdin/stdout with ntfsclone/partimage/partclone (feed_dev_in_server $fs $lv) conflicting with "while read", here we must use different file descriptor (4)
   exec 4< $logv_pse_con
   while read -u 4 lv fs; do
    # Process the real data partition, only those in the chosen partitions
    # Ex:
    # /dev/vg3/lvol0  Linux rev 1.0 ext3 filesystem data (large files)
    # Then lvol0 is belong to VG vg3
    volg="$(echo "$lv" | awk -F"/" '{print $3}')"
    # Find if the LV is in the chosen partition (via VG, we can determine that)
    # EX: tgt_parts: hda1, hda3, hda5...
    #     vg3 /dev/hda3 nPMQQ0-D2yN-YRHL-9fBM-0cUm-vgcw-DCUTri
    is_in_chosen_partition="no"
    for ipt in $tgt_p; do
      if [ -n "$(grep -E "[[:space:]]+/dev/$ipt[[:space:]]+" $pv_pse_con | grep -E "\<$volg\>")" ]; then
        # Found the chosen partitions is in the VG
        is_in_chosen_partition="yes"
        break
      fi
    done
    [ "$is_in_chosen_partition" = "no" ] && continue

    # Only when the target_type is disk we will create swap partition, other we might make a mistake to format the existing partition as swap partition.
    if [ "$target_type" = "disk" ]; then
      # if it's swap, output the labe and uuid only.
      case "$fs" in 
        *[Ss][Ww][Aa][Pp]*)
          fn="$(echo $lv | sed -e "s|^/dev/||" -e "s|/|-|g")"
          echo "Found the swap partition $lv, create it by:"
          # read LABEL, UUID info for $partition if swappt-${fn}.info exists
          uuid_opt=""
          label_opt=""
          if [ -e "$hd_tgt_tmp/swappt-${fn}.info" ]; then
            UUID=""
            LABEL=""
            . "$hd_tgt_tmp/swappt-${fn}.info"
            [ -n "$UUID" ] && uuid_opt="-U $UUID"
            [ -n "$LABEL" ] && label_opt="-L $LABEL"
          fi
          get_mkswap_uuid_cmd
          echo "${MKSWAP_UUID} $label_opt $uuid_opt $lv"
          ${MKSWAP_UUID} $label_opt $uuid_opt $lv
          echo $msg_delimiter_star_line
          continue ;;
        *extended*) 
          continue ;;
      esac
    fi
    receive_partition_from_server_then_write $fs $lv
    # use the next port to avoid being occupied.
    NC_PORT=$((NC_PORT + 2))
   done
   exec 4<&-
 fi
} # end of receive_partition_or_lv_in_client
#
clone_over_net() {
  local fn example_target ipart part_fs size
  # try to get the client's type
  case "$source_type" in
    partition)
       if [ "$STATUS" = "clone_server" ]; then
         echo "Running the clone server for $src_dev in port $NC_PORT..."
         part_fs="$(grep -Ew "/dev/$src_dev" $src_pt_info | awk -F" " '{print $2}')"
         if [ -z "$part_fs" ]; then
            [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
            echo "No file system was found in /dev/$src_dev!"
            echo "Skip feeding $src_dev..."
            [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
         else
	    feed_partition_or_lv_in_server $part_fs $src_dev
         fi
       elif [ "$STATUS" = "clone_client" ]; then
         echo "Restoring $tgt_dev from $SOURCE_IP:$NC_PORT..."
         part_fs="$(grep -Ew "/dev/$tgt_dev" $tgt_pt_info | awk -F" " '{print $2}')"
         if [ -z "$part_fs" ]; then
            [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
            echo "No file system was found in /dev/$tgt_dev!"
            echo "Skip receiving data for $tgt_dev..."
            [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
         else
	    receive_partition_or_lv_in_client $part_fs $tgt_dev
         fi
       fi
       example_target="hda1 or hda2 or sda1 or..."
       ;;
    disk)
       if [ "$STATUS" = "clone_server" ]; then
        # $src_pt_info:
        # "/dev/$part $filesystem $pt_size" 
        exec 5< $src_pt_info
        while read -u 5 ipart part_fs size; do
          spart="$(basename $ipart)"
          if [ -z "$part_fs" ]; then
             [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
             echo "No file system was found in /dev/$spart!"
             echo "Skip feeding partition /dev/$spart"
             [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
          elif [ -n "$(echo $part_fs | grep -Ei "(swap|extended)")" ]; then
             echo "Skip feeding partition $spart since it is $part_fs..."
          else
             feed_partition_or_lv_in_server $part_fs $spart
          fi
        done
        exec 5<&-
       elif [ "$STATUS" = "clone_client" ]; then
        # $tgt_pt_info:
        # "/dev/$part $filesystem $pt_size" 
        exec 6< $tgt_pt_info
        while read -u 6 ipart part_fs size; do
          t_part="$(basename $ipart)"
          if [ -z "$part_fs" ]; then
             [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
             echo "No file system was found in /dev/$t_part!"
             echo "Skip receiving data for /dev/$t_part"
           [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
          elif [ -n "$(echo $part_fs | grep -Ei "(swap|extended)")" ]; then
             echo "Skip feeding partition /dev/$t_part since it is $part_fs..."
          else
             receive_partition_or_lv_in_client $part_fs $t_part
          fi
        done
        exec 6<&-
       fi
       example_target="hda or hdb or sda or..."
       ;;
  esac
  echo "$msg_delimiter_star_line"
  [ -n "$filter" ] && filter_opt="-i $filter"
  if [ "$STATUS" = "clone_server" ]; then
    [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
    echo "$msg_now_run_this_cmd_in_target_machine:"
    echo "sudo su -"
    echo "ocs-live-netcfg ($msg_setup_network_first)"
    echo "$ocs $filter_opt -s $my_ips -t [TARGET_DEV]"
    echo "TARGET_DEV example: $example_target"
    case "$source_type" in
      partition)
      echo "$msg_if_clone_the_partition_to_hda1_in_target_machine:"
      echo "$ocs $filter_opt -s $my_ips -t hda1"
      ;;
    disk)
      echo "$msg_if_clone_the_disk_to_hda_in_target_machine:"
      echo "$ocs $filter_opt -s $my_ips -t hda"
      ;;
    esac
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
  fi
} # end of clone_over_net
#
post_process_in_target_dev() {
  local tgt_disk_select_opt target_parts
  # create swap partition, resize partition, clean the temp partition table, and re-install grub
  if [ "$mode" = "local" -o "$STATUS" = "clone_client" ]; then
    echo "$msg_delimiter_star_line"
    # Find the target_parts for later use in resize and partclone.ntfsfixboot
    if [ "$resize_partition" = "on" -o "$change_ntfs_boot_chs" = "on" ]; then
      case "$source_type" in
        partition) target_parts="$tgt_dev" ;;
        disk) 
          #target_parts="$(get_known_partition_sf_format $pt_tmp)" ;;
          BACKUP_DEVS=""
          echo "Searching for data partition(s) in target disk for post process: $target_hd..."
          get_known_partition_proc_format $target_hd data
          target_parts="$BACKUP_DEVS"
          ;;
      esac
    fi
    echo $msg_delimiter_star_line
    if [ "$resize_partition" = "on" ]; then
     for partition in $target_parts; do
       # hda1 -> hd_tmp, part_no_tmp ,i.e => hda, 1 
       hd_tmp="${partition:0:3}"
       part_no_tmp="${partition:3}"
       echo "Now resize the partition for $hd_tmp$part_no_tmp"
       ocs-resize-part --batch $hd_tmp $part_no_tmp
       echo $msg_delimiter_star_line
     done
    fi

    # Only when the target_type is disk we will create swap partition, other we might make a mistake to format the existing partition as swap partition.
    if [ "$target_type" = "disk" ]; then
      echo "Creating the swap partition if exists..."
      # swap partition
      # TODO: Shall we use better method instead of grep Id=82 ?
      for partition in `get_swap_partition_sf_format $tgt_pt_tmp`; do
        echo "Found the swap partition /dev/$partition, create it by:"
        # read LABEL, UUID info for $partition if swappt-$partition.info exists
        uuid_opt=""
        label_opt=""
        if [ -e "$hd_tgt_tmp/swappt-$partition.info" ]; then
          UUID=""
          LABEL=""
          . "$hd_tgt_tmp/swappt-$partition.info"
          [ -n "$UUID" ] && uuid_opt="-U $UUID"
          [ -n "$LABEL" ] && label_opt="-L $LABEL"
        fi
        get_mkswap_uuid_cmd
        echo "${MKSWAP_UUID} $label_opt $uuid_opt /dev/$partition"
        ${MKSWAP_UUID} $label_opt $uuid_opt /dev/$partition
      done
    fi
    echo "$msg_delimiter_star_line"
    # clean the tmp file
    [ -f "$tgt_pt_tmp" ] && rm -f $tgt_pt_tmp

    if [ "$install_grub" = "on" ]; then
      # Since it's local clone, we must assign the target hardisk, otherwise it might find the source hardisk. For example, hda -> hdc local clone, if no "-s $target_hd" is assigned, it will find hda as grub target.
      tgt_disk_select_opt="-s $target_hd"
      echo "Run grub install on disk $target_hd..."
      install_grub_hd $tgt_disk_select_opt $grub_partition
    fi
    echo "$msg_delimiter_star_line"
    if [ "$change_ntfs_boot_chs" = "on" ]; then
      echo "Try to run partclone.ntfsfixboot for NTFS boot partition if it exists. Scanning partition(s): $target_parts..."
      run_ntfsreloc_part -p "$target_parts" $ntfs_boot_partition
    fi
    echo "$msg_delimiter_star_line"
  fi
} # end of post_process_in_target_dev
#
set_filter_program() {
case "$filter" in
  bzip|bzip2)
       if which bzip2 &>/dev/null; then
         filter_comp="bzip2 -c"
         filter_decomp="bzip2 -cd"
       else
         [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
         echo "bzip2 is NOT found! Program terminated!!!"
         [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
	 exit 1
       fi
       ;;
   lzop)
       if which lzop &>/dev/null; then
         filter_comp="lzop -c"
         filter_decomp="lzop -cd"
       else
         [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
         echo "lzop is NOT found! Program terminated!!!"
         [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
	 exit 1
       fi
       ;;
   cat)
       filter_comp="cat"
       filter_decomp="cat"
       ;;
   *)
       if which gzip &>/dev/null; then
         filter_comp="gzip -c $extra_gzip_opt"
         filter_decomp="gzip -cd"
       else
         [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
         echo "gzip is NOT found! Program terminated!!!"
         [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
	 exit 1
       fi
       ;;
esac
} # end of set_filter_program
#
pre_checking() {
# Check if it runs in DRBL server and it's not DRBL/Clonezilla live. If true, warn user!
# Get the live media mount point.
get_live_media_mnt_point

if [ -d "$pxecfg_pd" -a ! -d "/$LIVE_MEDIA" ]; then
  [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
  echo "$msg_Warning!!! $msg_should_not_run_ocs_onthefly_in_server"
  echo "$msg_are_u_sure_u_want_to_continue ?"
  [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
  echo "[y/N]"
  read clone_ans
  case "$clone_ans" in
	  [y|Y][eE][sS])
          [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
	  echo "$msg_really_dangerous_then_continue"
          [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
	  echo -n "$msg_press_enter_to_continue"
	  read
	  ;;
	  *)
	  exit 0
	  ;;
  esac
fi

# check grub_partition if we want to install grub
if [ "$install_grub" = "on" ]; then
  if [ -z "`echo $grub_partition | grep "/dev/[sh]d[a-z][1-9]*"`" -a "$grub_partition" != "auto" ]; then
    [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
    echo "\"$grub_partition\" $msg_is_not_valid_grub_root! $msg_program_stop!"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
    exit 1
  fi
fi

#
if [ "$mode" = "local" ]; then
  # check if source and target are the same one if it's local clone!!!
  # we do not accept hda -> hda or hda2 -> hda2, however, hda2 -> hda3 is ok.
  if [ "$tgt_dev" = "$src_dev" ]; then
    echo "$msg_src_target_r_same_dev ($src_dev -> $tgt_dev) $msg_program_stop"
    exit 1
  fi
fi
} # end of pre_checking

#
USAGE() {
    echo "Usage:"
    echo "To run clonezilla on-the-fly:"
    echo "$ocs [OPTION]"
    echo "Option"
    echo "-b, --batch-mode   Run clone in batch mode (DANGEROUS!)"
    echo "-e, --load-geometry  Force to use the saved CHS (cylinders, heads, sectors) when using sfdisk"
    echo "-e1, --change-geometry NTFS-BOOT-PARTITION  Force to change the CHS (cylinders, heads, sectors) value of NTFS boot partitoin after image is restored. NTFS-BOOT-PARTITION can be one of \"/dev/hda1\", \"/dev/hda2\"... or \"auto\" (\"auto\" will let clonezilla detect the NTFS boot partition automatically)"
    echo "-e2, --load-geometry-from-edd  Force to use the CHS (cylinders, heads, sectors) from EDD (Enhanced Disk Device) when creating partition table by sfdisk"
    echo "-r, --resize-partition   Resize the target disk in target machine (To solve the small partition image restored to larger partition problem.)"
    echo "-f, --source DEV         Specify the source device as DEV (hda, hda1...)"
    echo "-g, --grub-install GRUB_PARTITION     Install grub in the MBR of the disk containing partition GRUB_PARTITION with root grub directory in the same GRUB_PARTITION when restoration finishs, GRUB_PARTITION can be one of \"/dev/hda1\", \"/dev/hda2\"... or \"auto\" (\"auto\" will let clonezilla detect the grub root partition automatically). If \"auto\" is assigned, it will work if grub partition and root partition are not in the same partition."
    echo "-i, --filter PROGRAM     Use the PROGRAM (gzip/lzop/bzip2/cat) before sending partition data to netcat (only in network clone mode). The default action is gzip. Use \"cat\" if you do not want to compress (Good for fast internode network)."
    echo "--nogui                  Do NOT show GUI of partimage, use text only"
    echo "-k, --no-sfdisk          Do NOT create partition table in boot sector in target machine"
    echo "-k1,                     Create partition table in the target disk proportionally."
    echo "-k2,                     Enter command line prompt to create partition table manually before restoring image."
    echo "-j2, --clone-hidden-data  Use dd to clone the image of the data between MBR (1st sector, i.e. 512 bytes) and 1st partition, which might be useful for some recovery tool."
    echo "-m, --no-boot-loader-clone  Do NOT clone boot loader"
    echo "-o, --load-geometry      Force to use the saved CHS (cylinders, heads, sectors) when using sfdisk in restoring."
    echo "-q1, --force-to-use-dd   Force to use sector-by-sector copy (supports all filesystem, but inefficient). By default we will use partclone to clone a partition."
    echo "-p, --port PORT          Specify the netcat port (Only in network clone mode)"
    echo "-a, --server             Specify the running machine is in network clone server."
    echo "-s, --source-IP IP       Specify the source IP address (used in target client machine)."
    echo "-t, --target DEV         Specify the target device as DEV (hda, hda1...)"
    echo "-v, --verbose            Prints verbose information"
    echo "-x, --interactive        Interactive mode."
    echo "Ex:"
    echo "1. To clone local hda to local hdb, run"
    echo "   $ocs -f hda -t hdb"
    echo "2. To clone hda (in machine A with IP 192.168.100.1) to hda (in machine B) via network,"
    echo "   In machine A, boot it into DRBL client mode, then run"
    echo "   $ocs -a -f hda"
    echo "   Then in machine B, boot it into DRBL client mode, too. Then run"
    echo "   $ocs --source-IP 192.168.100.1 -t hda"
    echo
}
#
ask_disk_to_local_disk() {
   local available_harddisk_no ANS_TMP
   # src_dev, tgt_dev is like hda, sda...
   available_harddisk_no="$(LC_ALL=C get_harddisk_list | wc -w)"
   if [ "$available_harddisk_no" -lt 2 ]; then
      [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
      echo "To do local disk to disk clone, there must be at least 2 harddisks in the machine! Only $available_harddisk_no disk is found!"
      [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
      echo "$msg_program_stop"
      echo -n "$msg_press_enter_to_continue"
      read
      exit 1
   fi
   ANS_TMP=`mktemp /tmp/ocs_ans.XXXXXX`
   trap "[ -f "$ANS_TMP" ] && rm -f $ANS_TMP" HUP INT QUIT TERM EXIT
   get_input_dev_name $ANS_TMP harddisk menu yes "$msg_local_source_disk \n$msg_linux_disk_naming $msg_press_space_to_mark_selection"
   # we have to remove " (comes with checklist in dialog) so that for loop
   # will work (Specially for FC3/4...)
   src_dev="$(cat $ANS_TMP | tr -d \")"
   [ -z "$src_dev" ] && exit 1
   check_input_hd $src_dev

   get_input_dev_name $ANS_TMP harddisk menu yes "$msg_local_target_disk \n$msg_linux_disk_naming $msg_press_space_to_mark_selection" "$src_dev"
   # we have to remove " (comes with checklist in dialog) so that for loop
   # will work (Specially for FC3/4...)
   tgt_dev="$(cat $ANS_TMP | tr -d \")"
   [ -f "$ANS_TMP" ] && rm -f $ANS_TMP
   [ -z "$tgt_dev" ] && exit 1
   check_input_hd $tgt_dev
} # end of ask_disk_to_local_disk
ask_disk_to_remote_disk() {
   local ANS_TMP
   # tgt_dev is like hda, sda...
   ANS_TMP=`mktemp /tmp/ocs_ans.XXXXXX`
   trap "[ -f "$ANS_TMP" ] && rm -f $ANS_TMP" HUP INT QUIT TERM EXIT
   get_input_dev_name $ANS_TMP harddisk menu yes "$msg_local_source_disk \n$msg_linux_disk_naming $msg_press_space_to_mark_selection"
   # we have to remove " (comes with checklist in dialog) so that for loop
   # will work (Specially for FC3/4...)
   src_dev="$(cat $ANS_TMP | tr -d \")"
   [ -f "$ANS_TMP" ] && rm -f $ANS_TMP
   [ -z "$src_dev" ] && exit 1
   check_input_hd $src_dev
}
ask_part_to_local_part() {
   local available_partition_no ANS_TMP
   #  src_dev, tgt_dev is like hda1, sda1...
   available_partition_no="$(get_partition_list | wc -w)"
   if [ "$available_partition_no" -lt 2 ]; then
      [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
      echo "To do local disk to disk clone, there must be at least 2 partitions in the machine! Only $available_partition_no disk is found!"
      [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
      echo "$msg_program_stop"
      echo -n "$msg_press_enter_to_continue"
      read
      exit 1
   fi
   ANS_TMP=`mktemp /tmp/ocs_ans.XXXXXX`
   trap "[ -f "$ANS_TMP" ] && rm -f $ANS_TMP" HUP INT QUIT TERM EXIT

   get_input_dev_name $ANS_TMP partition menu yes "$msg_local_source_part \n$msg_linux_parts_MS_mapping"
   # we have to remove " (comes with checklist in dialog) so that for loop
   # will work (Specially for FC3/4...)
   src_dev="$(cat $ANS_TMP | tr -d \")"
   [ -z "$src_dev" ] && exit 1
   check_input_partition $src_dev

   get_input_dev_name $ANS_TMP partition menu yes "$msg_local_target_part \n$msg_linux_parts_MS_mapping" "$src_dev"
   # we have to remove " (comes with checklist in dialog) so that for loop
   # will work (Specially for FC3/4...)
   tgt_dev="$(cat $ANS_TMP | tr -d \")"
   [ -f "$ANS_TMP" ] && rm -f $ANS_TMP
   [ -z "$tgt_dev" ] && exit 1
   check_input_partition $tgt_dev
} # end of ask_part_to_local_part
ask_part_to_remote_part() {
   local ANS_TMP
   # src_dev is like hda1, sda1...
   ANS_TMP=`mktemp /tmp/ocs_ans.XXXXXX`
   trap "[ -f "$ANS_TMP" ] && rm -f $ANS_TMP" HUP INT QUIT TERM EXIT
   get_input_dev_name $ANS_TMP partition menu yes "$msg_local_source_part \n$msg_linux_parts_MS_mapping"
   # we have to remove " (comes with checklist in dialog) so that for loop
   # will work (Specially for FC3/4...)
   src_dev="$(cat $ANS_TMP | tr -d \")"
   [ -f "$ANS_TMP" ] && rm -f $ANS_TMP
   [ -z "$src_dev" ] && exit 1
   check_input_partition $src_dev
} # end of ask_part_to_remote_part

#
get_onthefly_input_param() {
  local TMP ASK_OCS_ONTHEFLY_TYPE ocs_otf_type
  # (1) disk to local disk
  # (2) disk to remote disk
  # (3) partiiton to local partition
  # (4) partiiton to remote partition
  TMP="$(mktemp /tmp/ontheflymenu.XXXXXX)"
  ASK_OCS_ONTHEFLY_TYPE=1
  while [ "$ASK_OCS_ONTHEFLY_TYPE" -ne 0 ]; do
    $DIA --backtitle "$msg_nchc_free_software_labs" --title  \
    "$msg_nchc_clonezilla" --menu "$msg_clonezilla_is_free_and_no_warranty\n$msg_overwrite_data_on_disk_when_cloning\n$msg_choose_mode:" \
    0 0 0 \
    disk_to_local_disk  "$msg_disk_to_local_disk" \
    disk_to_remote_disk "$msg_disk_to_remote_disk" \
    part_to_local_part "$msg_part_to_local_part" \
    part_to_remote_part "$msg_part_to_remote_part" \
    "exit"           "$msg_exit. $msg_enter_cml" \
    2> $TMP
    ocs_otf_type="$(cat $TMP)"
    if [ -z "$ocs_otf_type" ]; then
      ASK_OCS_ONTHEFLY_TYPE=1
    else
      ASK_OCS_ONTHEFLY_TYPE=0
    fi
  done
  [ -f "$TMP" ] && rm -f $TMP
  [ -z "$ocs_otf_type" ] && echo "You must specify the action! Program terminated!!!" && exit 1
  # ocs_mode_prompt is to be shown in the title of dialog menu later
  ocs_mode_prompt="$ocs_otf_type"
  case "$ocs_otf_type" in
    disk_to_local_disk)	ask_disk_to_local_disk;;
    disk_to_remote_disk) 
                        STATUS="clone_server"
                        network_config_if_necessary
                        ask_disk_to_remote_disk;;
    part_to_local_part) ask_part_to_local_part;;
    part_to_remote_part) 
                        STATUS="clone_server"
                        network_config_if_necessary
                        ask_part_to_remote_part;;
    exit) exit 0;;
  esac
} # end of get_onthefly_input_param
set_ocs_onthefly_extra_param() {
  local fdisk_opt
  # This function is used to be called inside ocs-onthefly, not from other program.
  local OCS_PARAM_TMP="$(mktemp /tmp/onthefly-extramenu.XXXXXX)"
  if [ "$ocs_user_mode" = "expert" ]; then
    $DIA --separate-output --backtitle "$msg_nchc_free_software_labs" --title  \
    "$msg_ocs_onthefly_advanced_extra_param | $msg_mode: $ocs_mode_prompt" --checklist "$msg_choose_param_to_set:" \
    0 0 0 $DIA_ESC \
    "-g auto"  "$msg_ocs_onthefly_param_g" on \
    "-e1 auto" "$msg_ocs_onthefly_param_e1" on \
    "-e2"      "$msg_ocs_onthefly_param_e2" on \
    "-j2"      "$msg_ocs_onthefly_param_j2" on \
    "-r"       "$msg_ocs_onthefly_param_e" off \
    "-q1 "     "$msg_ocs_onthefly_param_q1" off \
    "-nogui"   "$msg_ocs_onthefly_param_nogui" off \
    "-m"       "$msg_ocs_onthefly_param_m" off \
    "-rescue"  "$msg_ocs_onthefly_param_rescue" off \
    "-fsck-src-part "   "$msg_ocs_onthefly_param_fsck_src_part" off \
    "-o"       "$msg_ocs_onthefly_param_o" off \
    "-b"       "$msg_ocs_onthefly_param_b" off \
    "-v"       "$msg_ocs_onthefly_param_v" off \
    2> $OCS_PARAM_TMP
  else
    echo "-g auto" "-e1 auto" "-e2" "-j2" > $OCS_PARAM_TMP
  fi
  # force to strip the unnecessary quotation ', this is specially for dialog (from cdialog) in Mandriva. Otherwise it will cause -p reboot become (containing space) '-p reboot', which is wrong option in dcs.
  LC_ALL=C perl -pi -e "s/\'//g" $OCS_PARAM_TMP

  # About partition table
  case "$source_type" in
    partition) 
    # Partition restore only. default NOT to create partition table
    if [ "$ocs_user_mode" = "expert" ]; then
      $DIA --backtitle "$msg_nchc_free_software_labs" --title  \
      "$msg_ocs_onthefly_advanced_extra_param | $msg_mode: $ocs_mode_prompt" --menu "$msg_choose_param_to_set_single_choice $msg_hint_for_fdisk:" \
      0 0 0 $DIA_ESC \
      "-k "      "$msg_ocs_onthefly_param_n"  \
      "-k1 "     "$msg_ocs_param_k1"  \
      "-k2 "     "$msg_ocs_param_k2"  \
      " "        "$msg_use_the_part_table_from_sourcedisk"  \
      "exit "    "$msg_exit" \
      2>> $OCS_PARAM_TMP
    else
      echo "-k " >> $OCS_PARAM_TMP
    fi
    ;;
    *)
    # Disk restore, default to create partition table
    if [ "$ocs_user_mode" = "expert" ]; then
      $DIA --backtitle "$msg_nchc_free_software_labs" --title  \
      "$msg_clonezilla_advanced_extra_param | $msg_mode: $ocs_mode_prompt" --menu "$msg_choose_param_to_set_single_choice $msg_hint_for_fdisk:" \
      0 0 0 $DIA_ESC \
      " "        "$msg_use_the_part_table_from_sourcedisk"  \
      "-k "      "$msg_ocs_onthefly_param_n"  \
      "-k1 "     "$msg_ocs_param_k1"  \
      "-k2 "     "$msg_ocs_param_k2"  \
      "exit "    "$msg_exit" \
      2>> $OCS_PARAM_TMP
    else
      echo " " >> $OCS_PARAM_TMP
    fi
    ;;
  esac
  if grep -Ew "exit" $OCS_PARAM_TMP &>/dev/null; then
    echo "$msg_program_stop"
    exit 1
  fi
  if grep -Ew "(-k1|k2)" $OCS_PARAM_TMP &>/dev/null; then
    # k1-2 is different partition size, turn on -r by default
    if [ -z "$(grep -w "\-r" $OCS_PARAM_TMP)" ]; then
      echo "Since the mode you choose might resize partition size, we turn on file system resize funtion automatically (-r)..."
      echo " -r " >> $OCS_PARAM_TMP
    fi
  fi
  # parse them
  ocs_onthefly_adv_param="$(cat $OCS_PARAM_TMP)"
  ocs_onthefly_adv_param="$(echo $ocs_onthefly_adv_param)"  # make it one line
  parse_ocs_onthefly_cmd_options $ocs_onthefly_adv_param
  [ -f "$OCS_PARAM_TMP" ] && rm -f $OCS_PARAM_TMP
} # end of set_ocs_onthefly_extra_param
#
check_source_and_target_type() {
# check source and target type
  if [ -n "$src_dev" ]; then
    check_input_param $src_dev
    ret=$?
    case "$ret" in
       3)
    	source_type="disk"
    	;;
       5)
    	source_type="partition"
    	;;
    esac
  fi
  if [ -n "$tgt_dev" ]; then
    check_input_param $tgt_dev
    ret=$?
    case "$ret" in
       3)
    	target_type="disk"
    	;;
       5)
    	target_type="partition"
    	;;
    esac
  fi
} # check_source_and_target_type
#
parse_ocs_onthefly_cmd_options() {
# Parse command-line options
  while [ $# -gt 0 ]; do
    case "$1" in
      -b|--batch-mode) shift; batch_mode="on" ;;
      -e1|--change-geometry)  
              change_ntfs_boot_chs="on"
              shift
              # skip the -xx option, in case 
              if [ -z "$(echo $1 |grep ^-.)" ]; then
                ntfs_boot_partition=$1
                shift
              fi
              [ -z "$ntfs_boot_partition" ] && USAGE && exit 1
              ;;
      -e2|--load-geometry-from-edd)
  	    shift; use_HD_CHS_from_EDD_pref="yes" ;;
      -l|--language)
  	    shift
              if [ -z "$(echo $1 |grep ^-.)" ]; then
                # skip the -xx option, in case 
  	      specified_lang="$1"
  	      shift
              fi
              [ -z "$specified_lang" ] && USAGE && exit 1
  	    ;;
      -g|--grub-install)  
              install_grub="on"
              shift
              if [ -z "$(echo $1 |grep ^-.)" ]; then
                # skip the -xx option, in case 
                grub_partition=$1
                shift
              fi
              [ -z "$grub_partition" ] && USAGE && exit 1
              ;;
      -n)     shift; create_part="no"
  	      echo "Option -n is deprecated! Please use -k in the future!"
  	      ;;
      -k|--no-sfdisk) shift; create_part="no" ;;
      -k1|--fdisk-proportion)  
              shift
              create_part="yes"
              create_part_type="proportion"
              ;;
      -k2|--fdisk-manual)  
              shift
              create_part="yes"
              create_part_type="manual"
              ;;
      -m|--no-boot-loader-clone) shift; CLONE_BOOT_LOADER="no" ;;
      -s|--source-IP)
              shift
  	      STATUS="clone_client"
              if [ -z "$(echo $1 |grep ^-.)" ]; then
                # skip the -xx option, in case 
                SOURCE_IP=$1
                shift
              fi
              [ -z "$SOURCE_IP" ] && USAGE && exit 1
              ;;
      -f|--source)
              shift
              if [ -z "$(echo $1 |grep ^-.)" ]; then
                # skip the -xx option, in case 
                src_dev=$1
                shift
              fi
              [ -z "$src_dev" ] && USAGE && exit 1
              ;;
      -t|--target)
              shift
              if [ -z "$(echo $1 |grep ^-.)" ]; then
                # skip the -xx option, in case 
                tgt_dev=$1
                shift
              fi
              [ -z "$tgt_dev" ] && USAGE && exit 1
              ;;
      -p|--port)
              shift
              if [ -z "$(echo $1 |grep ^-.)" ]; then
                # skip the -xx option, in case 
                NC_PORT=$1
                shift
              fi
              [ -z "$NC_PORT" ] && USAGE && exit 1
              ;;
      -q1|--force-to-use-dd) FORCE_TO_USE_DD="yes"; shift ;;
      -i|--filter)
              shift
              if [ -z "$(echo $1 |grep ^-.)" ]; then
                # skip the -xx option, in case 
  	      filter=$1
                shift
              fi
  	    [ -z "$filter" ] && USAGE && exit 1
  	    ;;
      -um|--user-mode)
              shift
              # skip the -xx option, in case 
              if [ -z "$(echo $1 |grep ^-.)" ]; then
                ocs_user_mode="$1"
                shift
              fi
              [ -z "$ocs_user_mode" ] && USAGE && exit 1
  	    ;;
      -a|--server) shift; STATUS="clone_server" ;;
      -r|--resize-partition) shift; resize_partition="on";;
      -o|--load-geometry) shift; load_HD_CHS_from_img="yes";;
      -nogui|--nogui) shift; nogui="on";;
      -x|--interactive) shift; ocs_onthefly_mode="interactive";; 
      -j2|--clone-hidden-data) shift; clone_hidden_data="yes";;
      -rescue|--rescue) shift; rescue_mode="on";;
      -fsck-src-part|--fsck-src-part) shift; fsck_source_part="yes";;
      -v|--verbose) shift; verbose="on" ;;
      -*)     echo "${0}: ${1}: invalid option" >&2
              USAGE >& 2
              exit 2 ;;
      *)      break ;;
    esac
  done
} # End of parse_ocs_onthefly_cmd_options
#
clean_tmp_dirs() {
  if [ "$STATUS" = "clone_server" ]; then
    [ -d "$hd_src_tmp" -a -n "$(echo $hd_src_tmp | grep "ocs_onthefly")" ] && rm -rf $hd_src_tmp
  elif [ "$STATUS" = "clone_client" ]; then
    [ -d "$hd_tgt_tmp" -a -n "$(echo $hd_tgt_tmp | grep "ocs_onthefly")" ] && rm -rf $hd_tgt_tmp
  fi
  [ -d "$local_tmp" -a -n "$(echo $local_tmp | grep "ocs_onthefly")" ] && rm -rf $local_tmp
} # end of clean_tmp_dirs
#
do_fsck_in_source_dev_if_assigned() {
  if [ "$mode" = "local" -o "$STATUS" = "clone_server" ]; then
    if [ "$fsck_source_part" = "yes" ]; then
     case "$source_type" in
      partition)
         part_fs="$(grep -Ew "/dev/$src_dev" $src_pt_info | awk -F" " '{print $2}')"
         if [ -z "$part_fs" ]; then
            [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
  	  echo "No file system was found in /dev/$src_dev! Skip fsck."
            [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
         else
	    fsck_partition $part_fs /dev/$src_dev
         fi
         ;;
      disk)
         echo $msg_delimiter_star_line
         BACKUP_DEVS=""
         echo "Searching for data partition(s) in source disk: $source_hd ..."
         get_known_partition_proc_format $source_hd data
         echo $msg_delimiter_star_line
         target_part_list="$(echo $BACKUP_DEVS | sed -e "s/$source_hd/$target_hd/g")"
         #for target_part in `get_known_partition_sf_format $pt_tmp`; do
         for target_part in $target_part_list; do
           # we need to know the source partition, so replace it, ex. hdc1 -> hda1
           # Ex: target_part: hdc1, hddev: hdc, part_no: 1, src_part: hda1
           hddev=${target_part:0:3}
           part_no=${target_part:3}
           src_part=$( echo $target_part | sed -e "s/$hddev/$source_hd/g" )
           part_fs="$(grep -Ew "/dev/$target_part" $tgt_pt_info | awk -F" " '{print $2}')"
           if [ -z "$part_fs" ]; then
              [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
              echo "No file system was found in /dev/$src_part! Skip fsck."
              [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
           else
	      fsck_partition $part_fs /dev/$src_part
           fi
         done
         ;;
     esac
    fi
  fi
} # end of do_fsck_in_source_dev_if_assigned


########################
##### MAIN PROGRAM #####
########################
# Fedora Core 1 seems to use dumb for rc1, we have to force it use linux.
# otherwise setterm will complain.
[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="linux"
echo "Setting the TERM as $TERM"
export TERM="$TERM"

#
check_if_root

# PARTIMAGE_RESTORE_OPT & PARTIMAGE_SAVE_OPT will put into partimage command options
PARTIMAGE_RESTORE_OPT=
PARTIMAGE_SAVE_OPT=
STATUS=
ocs_onthefly_mode=""
# Some default setting.
batch_mode="off"
install_grub="off"
grub_partition="auto" 
change_ntfs_boot_chs="off"
ntfs_boot_partition="auto"
use_HD_CHS_from_EDD_pref="no"
create_part="yes" 
CLONE_BOOT_LOADER="yes" 
resize_partition="off" 
load_HD_CHS_from_img="no" 
nogui="off" 
verbose="off" 
clone_hidden_data="no"
sfdisk_opt="--force"

#
parse_ocs_onthefly_cmd_options $*

ask_and_load_lang_set $specified_lang

# check DIA
check_DIA_set_ESC $DIA

# Turn off swap and LVM2, unlock the busy partitions.
turn_off_swap_and_LVM2

#
get_ntfsclone_progress_opt

#
if [ "$ocs_onthefly_mode" = "interactive" ]; then
  [ -z "$ocs_user_mode" ] && ask_if_beginner_or_expert_mode
  get_onthefly_input_param      # get src_dev, tgt_dev, for example.
  check_source_and_target_type
  set_ocs_onthefly_extra_param  # get OCS_PARAM_TMP
  [ -n "$tgt_dev" ] && tgt_dev_opt="-t $tgt_dev"
  [ "$STATUS" = "clone_server" ] && net_clone_opt="-a"
  run_again_fname="/tmp/ocs-onthefly-`date +%F-%H-%M`"
  [ "$BOOTUP" = "color" ] && $SETCOLOR_SUCCESS
  echo PS. $msg_run_drbl_ocs_again_cmd 
  echo "$0 $ocs_onthefly_adv_param $net_clone_opt -f $src_dev $tgt_dev_opt" | tee $run_again_fname
  echo "$msg_ocs_sr_again_command_saved_filename: $run_again_fname"
  [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
  [ -e "$run_again_fname" ] && chmod 755 $run_again_fname
  if [ "$batch_mode" != "on" ]; then
    echo -n "$msg_press_enter_to_continue "
    read
  fi
else
  check_source_and_target_type
fi
#
if [ -n "$STATUS" ]; then
  # It's in network clone mode
  if [ "$STATUS" = "clone_server" ]; then
    [ -z "$src_dev" ] && clean_tmp_dirs && USAGE && exit 1
  elif [ "$STATUS" = "clone_client" ]; then
    [ -z "$tgt_dev" -o -z "$SOURCE_IP" ] && clean_tmp_dirs && USAGE && exit 1
  fi
  #
  echo "$msg_delimiter_star_line"
  mode="network"
  my_ips="$(LC_ALL=C get-all-nic-ip -r)"
  echo "$msg_my_IP_in_drbl_env: $my_ips"
  [ -z "$NC_PORT" ] && NC_PORT=$NC_PORT_DEFAULT
  # The NC port for target machine to notify the server
  JOB_NOTIFY_PORT=$((NC_PORT +1))
  # Get the source port option of nc is "-p" or none.
  nc_lp_check
else
  # It's in local clone mode
  if [ -z "$src_dev" -o -z "$tgt_dev" ]; then 
    clean_tmp_dirs
    USAGE 
    exit 1
  fi
  #
  echo "$msg_delimiter_star_line"
  mode="local"
fi

#
set_filter_program

pre_checking

case "$mode" in
  local)
    if [ "$source_type" != "$target_type" ]; then
      [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
      echo "$msg_different_type_of_input_devs ($src_dev to $tgt_dev)! $msg_program_stop!"
      [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
      clean_tmp_dirs
      exit 1
    fi
    ;;
  network)
    # clean the stalled partimage and netcat process
    kill_clone_prog_nc_process
    ;;
esac


# convert partition to disk (Ex. hda1 -> hda), even if it's partition, the sed action is still OK, i.e. won't affect if it's partition already.
[ -n "$src_dev" ] && source_hd=$(echo $src_dev | sed -e "s/[0-9]*//g")
[ -n "$tgt_dev" ] && target_hd=$(echo $tgt_dev | sed -e "s/[0-9]*//g")

echo "$msg_delimiter_star_line"
# turn on DMA and turn off swap/LVM.
screen_not_blank
[ -n "$target_hd" ] && turn_on_hd_dma /dev/$target_hd

echo "$msg_delimiter_star_line"

# prepare the partition table and MBR (if necessary)
case "$mode" in
  local)   prepare_local_clone_dev_info ;;
  network) prepare_network_clone_dev_info ;;
esac

#
if [ "$nogui" = "on" ]; then
  PARTIMAGE_RESTORE_ONTHEFLY_OPT="-B gui=no"
fi
if [ "$nogui" = "off" ]; then
  # TUI is on.
  # Use the TUI mode for partclone (i.e. run with -N, otherwise by default partclone runs only text output)
  # //NOTE// Even if -N is set for partclone in save mode, it's useless, since we will stdout to another program to compress.
  PARTCLONE_RESTORE_ONTHEFLY_OPT="-N"
fi

if [ "$rescue_mode" = "on" ]; then
  PARTCLONE_RESTORE_ONTHEFLY_OPT="$PARTCLONE_RESTORE_ONTHEFLY_OPT --rescue"
fi

if [ "$verbose" = "on" ]; then
  echo "PARTIMAGE_RESTORE_OPT: $PARTIMAGE_RESTORE_OPT"
  echo "PARTIMAGE_SAVE_OPT: $PARTIMAGE_SAVE_OPT"
  echo "PARTCLONE_RESTORE_ONTHEFLY_OPT: $PARTCLONE_RESTORE_ONTHEFLY_OPT"
  echo "SOURCE: $src_dev"
  echo "TARGET: $tgt_dev"
  echo "PORT for netcat: $NC_PORT"
fi

# confirm first
confirm_do_it_in_target_dev

# Run fsck on the source partition
do_fsck_in_source_dev_if_assigned

# partition table
create_partition_table_in_target

# process the boot loader
if [ -z "$(LC_ALL=C grep -iE "^Partition Table:" $src_parted_info 2>/dev/null | grep -iE "gpt")" ]; then
  # Not GPT, then ask if clone boot loader
  clone_boot_loader_in_target
fi

#
echo "$msg_delimiter_star_line"
# start cloning
if [ "$batch_mode" != "on" ]; then
  continue_clone=""
  while [ -z "$continue_clone" ]; do
    [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
    echo "$msg_start_to_clone_data_to_target_machine"
    echo "$msg_are_u_sure_u_want_to_continue ?"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
    echo -n "[y/n] "
    read continue_clone
    case "$continue_clone" in
         y|Y|[yY][eE][sS])
            echo "$msg_ok_let_do_it!"
            ;;
         n|N|[nN][oO])
            clean_tmp_dirs
            echo "$msg_program_stop!"
            exit 1
            ;;
         *)
            [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
            echo "$msg_you_have_to_enter_yes_or_no!"
            [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
            echo $msg_delimiter_star_line
            ;;
    esac
  done
fi
#
case "$mode" in
  local) local_dev_clone ;;
  network) clone_over_net ;;
esac

# create swap partition, resize partition, clean the temp partition table, and re-install grub
post_process_in_target_dev

if [ "$STATUS" = "clone_server" ]; then
  echo "$msg_delimiter_star_line"
  echo -n "Waiting for the target machine to connect... "
  $NC_CMD -l $NC_LOCAL_PORT_OPT $JOB_NOTIFY_PORT
elif [ "$STATUS" = "clone_client" ]; then
  echo "$msg_delimiter_star_line"
  echo -n "Notifying the source machine that my job is done... "
  echo 'done!' | $NC_CMD $NC_QUIT_OPT $SOURCE_IP $JOB_NOTIFY_PORT
  echo 'done!'
fi

# Clean tmp dir
clean_tmp_dirs

exit 0
