This is a copy of one chapter from the Info file gcc.info*.
For full information on installing and porting GCC, refer to the
GCC manual:

  Info file   gcc.info
  TeX output  gcc.dvi
  TeX source  gcc.texinfo


Installing GNU CC
*****************

   Here is the procedure for installing GNU CC on a Unix system.

* Menu:

* Other Dir::     Compiling in a separate directory (not where the source is).
* Sun Install::   See below for installation on the Sun.
* 3B1 Install::   See below for installation on the 3B1.
* VMS Install::   See below for installation on VMS.
* Unos Install::  See below for installation on Unos (from CRDS).

  1. If you have built GNU CC previously in the same directory for a
     different target machine, do `make distclean' to delete all files
     that might be invalid.

  2. On a Sequent system, go to the Berkeley universe.

  3. On a System V release 4 system, make sure `/usr/bin' precedes
     `/usr/ucb' in `PATH'.  The `cc' command in `/usr/ucb' uses
     libraries which have bugs.

  4. Specify the host and target machine configurations.  You do this
     by running the file `configure' with appropriate arguments.

        If you are building a compiler to produce code for the machine
     it runs on, specify just one machine type.  To build a
     cross-compiler, specify two configurations, one for the "host
     machine" (which the compiler runs on), and one for the "target
     machine" (which the compiler produces code for).  The command
     looks like this:

          configure --host=sun3-sunos3 --target=sparc-sun-sunos4.1

        A configuration name may be canonical or it may be more or less
     abbreviated.

        A canonical configuration name has three parts, separated by
     dashes.  It looks like this: `CPU-COMPANY-SYSTEM'.  (The three
     parts may themselves contain dashes; `configure' can figure out
     which dashes serve which purpose.)  For example,
     `m68k-sun-sunos4.1' specifies a Sun 3.

        You can also replace parts of the configuration by nicknames
     or aliases.  For example, `sun3' stands for `m68k-sun', so
     `sun3-sunos4.1' is another way to specify a Sun 3.  You can also
     use simply `sun3-sunos', since the version of SunOS is assumed by
     default to be version 4.  `sun3-bsd' also works, since
     `configure' knows that the only BSD variant on a Sun 3 is SunOS.

        You can specify a version number after any of the system
     types, and some of the CPU types.  In most cases, the version is
     irrelevant, and will be ignored.  So you might as well specify
     the version if you know it.

        Here are the possible CPU types:

          a29k, arm, cN, hppa, i386, i860, m68000, m68k, m88k, mips,
          ns32k, romp, rs6000, sparc, vax.

        Here are the recognized company names.  As you can see,
     customary abbreviations are used rather than the longer official
     names.

          alliant, altos, apollo, att, convergent, convex, crds, dec,
          dg, encore, harris, hp, ibm, mips, motorola, ncr, next, ns,
          omron, sequent, sgi, sony, sun, tti, unicom.

        The company name is meaningful only to disambiguate when the
     rest of the information supplied is insufficient.  You can omit
     it, writing just `CPU-SYSTEM', if it is not needed.  For example,
     `vax-ultrix4.2' is equivalent to `vax-dec-ultrix4.2'.

        Here is a list of system types:

          bsd, sysv, mach, minix, genix, ultrix, vms, sco, isc, aix,
          sunos, hpux, unos, luna, dgux, newsos, osfrose, osf, dynix,
          aos, ctix.

     You can omit the system type; then `configure' guesses the
     operating system from the CPU and company.

        You can add a version number to the system type; this may or
     may not make a difference.  For example, you can write `bsd4.3' or
     `bsd4.4' to distinguish versions of BSD.  In practice, the version
     number is most needed for `sysv3' and `sysv4', which are often
     treated differently.

        If you specify an impossible combination such as `i860-dg-vms',
     then you may get an error message from `configure', or it may
     ignore part of the information and do the best it can with the
     rest.  `configure' always prints the canonical name for the
     alternative that it used.

        Often a particular model of machine has a name.  Many machine
     names are recognized as aliases for CPU/company combinations. 
     Thus, the machine name `sun3', mentioned above, is an alias for
     `m68k-sun'.  Sometimes we accept a company name as a machine
     name, when the name is popularly used for a particular machine. 
     Here is a table of the known machine names:

          3300, 3b1, 7300, altos3068, altos, apollo68, att-7300,
          balance, convex-cN, crds, decstation-3100, decstation-dec,
          decstation, delta, encore, gmicro, hp7NN, hp8NN, hp9k2NN,
          hp9k3NN, hp9k7NN, hp9k8NN, iris4d, iris, isi68, m3230,
          magnum, merlin, miniframe, mmax, news-3600, news800, news,
          next, pbd, pc532, pmax, ps2, risc-news, rtpc, sun2, sun386i,
          sun386, sun3, sun4, symmetry, tower-32, tower.

     Remember that a machine name specifies both the cpu type and the
     company name.

        On certain systems, you must specify whether you want GNU CC
     to work with the usual compilation tools or with the GNU
     compilation tools (including GAS).  Use the `--gas' argument when
     you run `configure', if you want to use the GNU tools.  The
     systems were this makes a difference are `i386-ANYTHING-sysv',
     `i860-ANYTHING-bsd', `m68k-hp-hpux', `m68k-sony-bsd',
     `m68k-altos-sysv', `m68000-hp-hpux', and `m68000-att-sysv'.  On
     any other system, `--gas' has no effect.

        On certain systems, you must specify whether the machine has a
     floating point unit.  These systems are `m68k-sun-sunosN' and
     `m68k-isi-bsd'.  On any other system, `--nfp' currently has no
     effect, though perhaps there are other systems where it could
     usefully make a difference.

        If you want to install your own homemade configuration files,
     you can use `local' as the company name to access them.  If you
     use configuration `CPU-local', the entire configuration name is
     used to form the configuration file names.

        Thus, if you specify `m68k-local', then the files used are
     `m68k-local.md', `m68k-local.h', `m68k-local.c',
     `xm-m68k-local.h', `t-m68k-local', and `x-m68k-local'.

        Here is a list of configurations that have special treatment
     or special things you must know:

    `hppa-hp-hpux'
          HP precision architecture, running HP-UX.  `-g' does not work
          on this configuration, since the system uses a peculiar
          debugging format which GNU CC does not know about.

    `i386-*-sco'
          Compilation with RCC is recommended, but it produces lots of
          spurious warnings.  They do not necessarily indicate that
          anything is wrong.

    `m68000-att'
          AT&T 3b1, a.k.a. 7300 PC.  Special procedures are needed to
          compile GNU CC with this machine's standard C compiler, due
          to bugs in that compiler.  *Note 3b1 Install::.  You can
          bootstrap it more easily with previous versions of GNU CC if
          you have them.

    `m68000-hp-bsd'
          HP 9000 series 200 running BSD.  Note that the C compiler
          that comes with this system cannot compile GNU CC; contact
          `law@super.org' to get binaries of GNU CC for bootstrapping.

    `m68k-altos'
          Altos 3068.  You must use the GNU assembler, linker and
          debugger, with COFF-encapsulation.  Also, you must fix a
          kernel bug.  Details in the file `ALTOS-README'.

    `m68k-hp-hpux'
          HP 9000 series 300 or 400 running HP-UX.  HP-UX version 8.0
          has a bug in the assembler that prevents compilation of GNU
          CC.  To fix it, get patch PHCO_0800 from HP.

          In addition, `--gas' does not currently work with this
          configuration.  Changes in HP-UX have broken the library
          conversion tool and the linker.

    `m68k-sun'
          Sun 3.  We do not provide a configuration file to use the
          Sun FPA by default, because programs that establish signal
          handlers for floating point traps inherently cannot work
          with the FPA.

    `m88k-dgux'
          Motorola m88k running DG/UX.  To build native or cross
          compilers on DG/UX, you must first change to the 88open BCS
          software development environment.  This is done by issuing
          this command:

               eval `sde-target m88kbcs`

    `mips-mips-bsd'
          MIPS machines running the MIPS operating system in BSD mode.
           It's possible that some old versions of the system lack the
          functions `memcpy', `memcmp', and `memset'.  If your system
          lacks these, you must remove or undo the definition of
          `TARGET_MEM_FUNCTIONS' in `mips-bsd.h'.

    `ns32k-encore'
          Encore ns32000 system.  Encore systems are supported only
          under BSD.

    `ns32k-*-genix'
          National Semiconductor ns32000 system.  Genix has bugs in
          `alloca' and `malloc'; you must get the compiled versions of
          these from GNU Emacs.

    `ns32k-utek'
          UTEK ns32000 system ("merlin").  The C compiler that comes
          with this system cannot compile GNU CC; contact
          `tektronix!reed!mason' to get binaries of GNU CC for
          bootstrapping.

    `pyramid'
          The Pyramid C compler is reported to be unable to compile
          GNU CC.  You must use an older version of GNU CC for
          bootstrapping.

    `vax-dec-ultrix'
          Don't try compiling with Vax C (`vcc').  It produces
          incorrect code in some cases (for example, when `alloca' is
          used).

          Meanwhile, compiling `cp-parse.c' with pcc does not work
          because of an internal table size limitation in that
          compiler.  To avoid this problem, compile just the GNU C
          compiler first, and use it to recompile building all the
          languages that you want to run.

        Here we spell out what files will be set up by `configure'. 
     Normally you need not be concerned with these files.

        * A symbolic link named `config.h' is made to the top-level
          config file for the machine you will run the compiler on
          (*note Config::.).  This file is responsible for defining
          information about the host machine.  It includes `tm.h'.

          The top-level config file is located in the subdirectory
          `config'.  Its name is always `xm-SOMETHING.h'; usually
          `xm-MACHINE.h', but there are some exceptions.

          If your system does not support symbolic links, you might
          want to set up `config.h' to contain a `#include' command
          which refers to the appropriate file.

        * A symbolic link named `tconfig.h' is made to the top-level
          config file for your target machine.  This is used for
          compiling certain programs to run on that machine.

        * A symbolic link named `tm.h' is made to the
          machine-description macro file for your target machine.  It
          should be in the subdirectory `config' and its name is often
          `MACHINE.h'.

        * A symbolic link named `md' will be made to the machine
          description pattern file.  It should be in the `config'
          subdirectory and its name should be `MACHINE.md'; but
          MACHINE is often not the same as the name used in the `tm.h'
          file because the `md' files are more general.

        * A symbolic link named `aux-output.c' will be made to the
          output subroutine file for your machine.  It should be in
          the `config' subdirectory and its name should be `MACHINE.c'.

        * The command file `configure' also constructs `Makefile' by
          adding some text to the template file `Makefile.in'.  The
          additional text comes from files in the `config' directory,
          named `t-TARGET' and `h-HOST'.  If these files do not exist,
          it means nothing needs to be added for a given target or
          host.

  5. Make sure the Bison parser generator is installed.  (This is
     unnecessary if the Bison output files `c-parse.c' and `cexp.c'
     are more recent than `c-parse.y' and `cexp.y' and you do not plan
     to change the `.y' files.)

        Bison versions older than Sept 8, 1988 will produce incorrect
     output for `c-parse.c'.

  6. Build the compiler.  Just type `make LANGUAGES=c' in the compiler
     directory.

        `LANGUAGES=c' specifies that only the C compiler should be
     compiled.  The makefile normally builds compilers for all the
     supported languages; currently, C, C++ and Objective C.  However,
     C is the only language that is sure to work when you build with
     other non-GNU C compilers.  In addition, building anything but C
     at this stage is a waste of time.

        In general, you can specify the languages to build by typing
     the argument `LANGUAGES="LIST"', where LIST is one or more words
     from the list `c', `c++', and `objective-c'.

        Ignore any warnings you may see about "statement not reached"
     in `insn-emit.c'; they are normal.  Any other compilation errors
     may represent bugs in the port to your machine or operating
     system, and should be investigated and reported (*note Bugs::.).

        Some commercial compilers fail to compile GNU CC because they
     have bugs or limitations.  For example, the Microsoft compiler is
     said to run out of macro space.  Some Ultrix compilers run out of
     expression space; then you need to break up the statement where
     the problem happens.

  7. If you are using COFF-encapsulation, you must convert `libgcc.a'
     to a GNU-format library at this point.  See the file
     `README-ENCAP' in the directory containing the GNU binary file
     utilities, for directions.

  8. Move the first-stage object files and executables into a
     subdirectory with this command:

          make stage1

        The files are moved into a subdirectory named `stage1'.  Once
     installation is complete, you may wish to delete these files with
     `rm -r stage1'.

  9. Recompile the compiler with itself, with this command:

          make CC=stage1/gcc CFLAGS="-g -O -Bstage1/"

        This is called making the stage 2 compiler.

        The command shown above builds compilers for all the supported
     languages.  If you don't want them all, you can specify the
     languages to build by typing the argument `LANGUAGES="LIST"'. 
     LIST should contain one or more words from the list `c', `c++',
     and `objective-c', separated by spaces.

        On a 68000 or 68020 system lacking floating point hardware,
     unless you have selected a `tm.h' file that expects by default
     that there is no such hardware, do this instead:

          make CC=stage1/gcc CFLAGS="-g -O -Bstage1/ -msoft-float"

 10. If you wish to test the compiler by compiling it with itself one
     more time, do this:

          make stage2
          make CC=stage2/gcc CFLAGS="-g -O -Bstage2/"

     This is called making the stage 3 compiler.  Aside from the `-B'
     option, the options should be the same as when you made the stage
     2 compiler.

        Then compare the latest object files with the stage 2 object
     files--they ought to be identical, unless they contain time
     stamps.  On systems where object files do not contain time
     stamps, you can do this (in Bourne shell):

          for file in *.o; do
          cmp $file stage2/$file
          done

        This will mention any object files that differ between stage 2
     and stage 3.  Any difference, no matter how innocuous, indicates
     that the stage 2 compiler has compiled GNU CC incorrectly, and is
     therefore a potentially serious bug which you should investigate
     and report (*note Bugs::.).

        On systems that use COFF object files, or an object file
     format that is a superset of COFF (such as ECOFF or XCOFF), bytes
     5 to 8 will always be different, since it is a timestamp.  On
     these systems, you can do the comparison as follows (in Bourne
     shell):

          for file in *.o; do
          tail +10c $file > foo1
          tail +10c stage2/$file > foo2
          cmp foo1 foo2 || echo $file
          done

        If you have built the compiler with the `-mno-mips-tfile'
     option on MIPS machines, you will not be able to compare the
     files.

 11. Install the compiler driver, the compiler's passes and run-time
     support.  You can use the following command:

          make CC=stage2/gcc install

     (Use the same value for `CC' that you used when compiling the
     files that are being installed.)

        This copies the files `cc1', `cpp' and `libgcc.a' to files
     `cc1', `cpp' and `libgcc.a' in directory
     `/usr/local/lib/gcc-lib/TARGET/VERSION', which is where the
     compiler driver program looks for them.  Here TARGET is the target
     machine type specified when you ran `configure', and VERSION is
     the version number of GNU CC.  This naming scheme permits various
     versions and/or cross-compilers to coexist.

        It also copies the driver program `gcc' into the directory
     `/usr/local/bin', so that it appears in typical execution search
     paths.

        *Warning: there is a bug in `alloca' in the Sun library.  To
     avoid this bug, be sure to install the executables of GNU CC that
     were compiled by GNU CC.  (That is, the executables from stage 2
     or 3, not stage 1.)  They use `alloca' as a built-in function and
     never the one in the library.*

        (It is usually better to install GNU CC executables from stage
     2 or 3, since they usually run faster than the ones compiled with
     some other compiler.)

 12. If you will be using C++ or Objective C, and your operating
     system does not handle constructors, then you must build and
     install the program `collect2'.  Do this with the following
     command:

          make CC="stage2/gcc -O" install-collect2

        The systems that *do* handle constructors on their own include
     system V release 4, and system V release 3 on the Intel 386.

        Berkeley systems that use the "a.out" object file format handle
     constructors without `collect2' if you use the GNU linker.  But if
     you don't use the GNU linker, then you need `collect2' on these
     systems.

 13. Build and install `protoize' if you want it.  Type

          make CC="stage2/gcc -O" install-proto

        There is as yet no documentation for `protoize'.  Sorry.

 14. Correct errors in the header files on your machine.

        Various system header files often contain constructs which are
     incompatible with ANSI C, and they will not work when you compile
     programs with GNU CC.  This behavior consists of substituting for
     macro argument names when they appear inside of character
     constants.  The most common offender is `ioctl.h'.

        You can overcome this problem when you compile by specifying
     the `-traditional' option.

        Alternatively, on Sun systems and 4.3BSD at least, you can
     correct the include files by running the shell script
     `fixincludes'.  This installs modified, corrected copies of the
     files `ioctl.h', `ttychars.h' and many others, in a special
     directory where only GNU CC will normally look for them.  This
     script will work on various systems because it chooses the files
     by searching all the system headers for the problem cases that we
     know about.

        Use the following command to do this:

          make install-fixincludes

     If you selected a different directory for GNU CC installation
     when you installed it, by specifying the Make variable `prefix' or
     `libdir', specify it the same way in this command.

        Note that some systems are starting to come with ANSI C system
     header files.  On these systems, don't run `fixincludes'; it may
     not work, and is certainly not necessary.

   If you cannot install the compiler's passes and run-time support in
`/usr/local/lib', you can alternatively use the `-B' option to specify
a prefix by which they may be found.  The compiler concatenates the
prefix with the names  `cpp', `cc1' and `libgcc.a'.  Thus, you can put
the files in a directory `/usr/foo/gcc' and specify `-B/usr/foo/gcc/'
when you run GNU CC.

   Also, you can specify an alternative default directory for these
files by setting the Make variable `libdir' when you make GNU CC.


Compilation in a Separate Directory
===================================

   If you wish to build the object files and executables in a directory
other than the one containing the source files, here is what you must
do differently:

  1. Make sure you have a version of Make that supports the `VPATH'
     feature.  (GNU Make supports it, as do Make versions on most BSD
     systems.)

  2. If you have ever run `configure' in the source directory, you
     must undo the configuration.  Do this by running:

          make cleanconfig

  3. Go to the directory in which you want to build the compiler before
     running `configure':

          mkdir gcc-sun3
          cd gcc-sun3

        On systems that do not support symbolic links, this directory
     must be on the same file system as the source code directory.

  4. Specify where to find `configure' when you run it:

          ../gcc-2.00/configure ...

        This also tells `configure' where to find the compiler sources;
     `configure' takes the directory from the file name that was used
     to invoke it.  But if you want to be sure, you can specify the
     source directory with the `--srcdir' option, like this:

          ../gcc-2.00/configure --srcdir=../gcc-2.00 sun3

        The directory you specify with `--srcdir' need not be the same
     as the one that `configure' is found in.

   Now, you can run `make' in that directory.  You need not repeat the
configuration steps shown above, when ordinary source files change. 
You must, however, run `configure' again when the configuration files
change, if your system does not support symbolic links.


Installing GNU CC on the Sun
============================

   Make sure the environment variable `FLOAT_OPTION' is not set when
you compile `libgcc.a'.  If this option were set to `f68881' when
`libgcc.a' is compiled, the resulting code would demand to be linked
with a special startup file and would not link properly without
special pains.

   There is a bug in `alloca' in certain versions of the Sun library. 
To avoid this bug, install the binaries of GNU CC that were compiled by
GNU CC.  They use `alloca' as a built-in function and never the one in
the library.

   Some versions of the Sun compiler crash when compiling GNU CC.  The
problem is a segmentation fault in cpp.  This problem seems to be due
to the bulk of data in the environment variables.  You may be able to
avoid it by using the following command to compile GNU CC with Sun CC:

     make CC="TERMCAP=x OBJS=x LIBFUNCS=x STAGESTUFF=x cc"


Installing GNU CC on the 3b1
============================

   Installing GNU CC on the 3b1 is difficult if you do not already have
GNU CC running, due to bugs in the installed C compiler.  However, the
following procedure might work.  We are unable to test it.

  1. Comment out the `#include "config.h"' line on line 37 of `cccp.c'
     and do `make cpp'.  This makes a preliminary version of GNU cpp.

  2. Save the old `/lib/cpp' and copy the preliminary GNU cpp to that
     file name.

  3. Undo your change in `cccp.c', or reinstall the original version,
     and do `make cpp' again.

  4. Copy this final version of GNU cpp into `/lib/cpp'.

  5. Replace every occurrence of `obstack_free' in the file `tree.c'
     with `_obstack_free'.

  6. Run `make' to get the first-stage GNU CC.

  7. Reinstall the original version of `/lib/cpp'.

  8. Now you can compile GNU CC with itself and install it in the
     normal fashion.


Installing GNU CC on Unos
=========================

   Use `configure unos' for building on Unos.

   The Unos assembler is named `casm' instead of `as'.  For some
strange reason linking `/bin/as' to `/bin/casm' changes the behavior,
and does not work.  So, when installing GNU CC, you should install the
following script as `as' in the subdirectory where the passes of GCC
are installed:

     #!/bin/sh
     casm $*

   The default Unos library is named `libunos.a' instead of `libc.a'. 
To allow GNU CC to function, either change all references to `-lc' in
`gcc.c' to `-lunos' or link `/lib/libc.a' to `/lib/libunos.a'.

   When compiling GNU CC with the standard compiler, to overcome bugs
in the support of `alloca', do not use `-O' when making stage 2.  Then
use the stage 2 compiler with `-O' to make the stage 3 compiler.  This
compiler will have the same characteristics as the usual stage 2
compiler on other systems.  Use it to make a stage 4 compiler and
compare that with stage 3 to verify proper compilation.

   Unos uses memory segmentation instead of demand paging, so you will
need a lot of memory.  5 Mb is barely enough if no other tasks are
running.  If linking `cc1' fails, try putting the object files into a
library and linking from that library.


Installing GNU CC on VMS
========================

   The VMS version of GNU CC is distributed in a backup saveset
containing both source code and precompiled binaries.

   To install the `gcc' command so you can use the compiler easily, in
the same manner as you use the VMS C compiler, you must install the
VMS CLD file for GNU CC as follows:

  1. Define the VMS logical names `GNU_CC' and `GNU_CC_INCLUDE' to
     point to the directories where the GNU CC executables (`gcc-cpp',
     `gcc-cc1', etc.) and the C include files are kept.  This should
     be done with the commands:

          $ assign /system /translation=concealed -
            disk:[gcc.] gnu_cc
          $ assign /system /translation=concealed -
            disk:[gcc.include.] gnu_cc_include

     with the appropriate disk and directory names.  These commands
     can be placed in your system startup file so they will be
     executed whenever the machine is rebooted.  You may, if you
     choose, do this via the `GCC_INSTALL.COM' script in the `[GCC]'
     directory.

  2. Install the `GCC' command with the command line:

          $ set command /table=sys$common:[syslib]dcltables -
            /output=sys$common:[syslib]dcltables gnu_cc:[000000]gcc
          $ install replace sys$common:[syslib]dcltables

  3. To install the help file, do the following:

          $ lib/help sys$library:helplib.hlb gcc.hlp

     Now you can invoke the compiler with a command like `gcc /verbose
     file.c', which is equivalent to the command `gcc -v -c file.c' in
     Unix.

   If you wish to use GNU C++ you must first install GNU CC, and then
perform the following steps:

  1. Define the VMS logical name `GNU_GXX_INCLUDE' to point to the
     directory where the preprocessor will search for the C++ header
     files.  This can be done with the command:

          $ assign /system /translation=concealed -
            disk:[gcc.gxx_include.] gnu_gxx_include

     with the appropriate disk and directory name.  If you are going
     to be using libg++, this is where the libg++ install procedure
     will install the libg++ header files.

  2. Obtain the file `gcc-cc1plus.exe', and place this in the same
     directory that `gcc-cc1.exe' is kept.

        The GNU C++ compiler can be invoked with a command like `gcc
     /plus /verbose file.cc', which is equivalent to the command `g++
     -v -c file.cc' in Unix.

   We try to put corresponding binaries and sources on the VMS
distribution tape.  But sometimes the binaries will be from an older
version that the sources, because we don't always have time to update
them.  (Use the `/version' option to determine the version number of
the binaries and compare it with the source file `version.c' to tell
whether this is so.)  In this case, you should use the binaries you
get to recompile the sources.  If you must recompile, here is how:

  1. Copy the file `vms.h' to `tm.h', `xm-vms.h' to `config.h',
     `vax.md' to `md.' and `vax.c' to `aux-output.c'.  The files to be
     copied are found in the subdirectory named `config'; they should
     be copied to the main directory of GNU CC.  If you wish, you may
     use the command file `config-gcc.com' to perform these steps for
     you.

  2. Setup the logical names and command tables as defined above.  In
     addition, define the VMS logical name `GNU_BISON' to point at the
     to the directories where the Bison executable is kept.  This
     should be done with the command:

          $ assign /system /translation=concealed -
            disk:[bison.] gnu_bison

        You may, if you choose, use the `INSTALL_BISON.COM' script in
     the `[BISON]' directory.

  3. Install the `BISON' command with the command line:

          $ set command /table=sys$common:[syslib]dcltables -
            /output=sys$common:[syslib]dcltables -
            gnu_bison:[000000]bison
          $ install replace sys$common:[syslib]dcltables

  4. Type `@make-gcc' to recompile everything (alternatively, you may
     submit the file `make-gcc.com' to a batch queue).  If you wish to
     build the GNU C++ compiler as well as the GNU CC compiler, you
     must first edit `make-gcc.com' and follow the instructions that
     appear in the comments.

  5. In order to use GCC, you need a library of functions which GCC
     compiled code will call to perform certain tasks, and these
     functions are defined in the file `libgcc2.c'.  To compile this
     you should use the command procedure `make-l2.com', which will
     generate the library `libgcc2.olb'.  `libgcc2.olb' should be
     built using the compiler built from the same distribution that
     `libgcc2.c' came from, and `make-gcc.com' will automatically do
     all of this for you.

        To install the library, use the following commands:

          $ lib gnu_cc:[000000]gcclib/delete=(new,eprintf)
          $ lib libgcc2/extract=*/output=libgcc2.obj
          $ lib gnu_cc:[000000]gcclib libgcc2.obj

        The first command simply removes old modules that will be
     replaced with modules from libgcc2.  If the VMS librarian
     complains about those modules not being present, simply ignore
     the message and continue on with the next command.

        Whenever you update the compiler on your system, you should
     also update the library with the above procedure.

        *If you are building GNU CC with a previous version of GNU CC,
     you also should check to see that you have the newest version of
     the assembler*.  In particular, GNU CC version 2 treats global
     constant variables slightly differently from GNU CC version 1,
     and GAS version 1.38.1 does not have the patches required to work
     with GCC version 2.  If you use GAS 1.38.1, then `extern const'
     variables will not have the read-only bit set, and the linker
     will generate warning messages about mismatched psect attributes
     for these variables.  These warning messages are merely a
     nuisance, and can safely be ignored.

        If you are compiling with a version of GNU CC older than 1.33,
     specify `/DEFINE=("inline=")' as an option in all the
     compilations.  This requires editing all the `gcc' commands in
     `make-cc1.com'.  (The older versions had problems supporting
     `inline'.)  Once you have a working 1.33 or newer GNU CC, you can
     change this file back.

   Under previous versions of GNU CC, the generated code would
occasionally give strange results when linked to the sharable
`VAXCRTL' library.  Now this should work.

   Even with this version, however, GNU CC itself should not be linked
to the sharable `VAXCRTL'.  The `qsort' routine supplied with
`VAXCRTL' has a bug which can cause a compiler crash.

   Similarly, the preprocessor should not be linked to the sharable
`VAXCRTL'.  The `strncat' routine supplied with `VAXCRTL' has a bug
which can cause the preprocessor to go into an infinite loop.

   If you attempt to link to the sharable `VAXCRTL', the VMS linker
will strongly resist any effort to force it to use the `qsort' and
`strncat' routines from `gcclib'.  Until the bugs in `VAXCRTL' have
been fixed, linking any of the compiler components to the sharable
VAXCRTL is not recommended.  (These routines can be bypassed by
placing duplicate copies of `qsort' and `strncat' in `gcclib' under
different names, and patching the compiler sources to use these
routines).  Both of the bugs in `VAXCRTL' are still present in VMS
version 5.4-1, which is the most recent version as of this writing.

   The executables that are generated by `make-cc1.com' and
`make-cccp.com' use the nonshared version of `VAXCRTL' (and thus use
the `qsort' and `strncat' routines from `gcclib.olb').

