B. Major Differences From The Bourne Shell

Bash implements essentially the same grammar, parameter and variable expansion, redirection, and quoting as the Bourne Shell. Bash uses the POSIX 1003.2 standard as the specification of how these features are to be implemented. There are some differences between the traditional Bourne shell and Bash; this section quickly details the differences of significance. A number of these differences are explained in greater depth in previous sections. This section uses the version of sh included in SVR4.2 as the baseline reference.

• Bash is POSIX-conformant, even where the POSIX specification differs from traditional sh behavior (see section 6.11 Bash POSIX Mode).

• Bash has multi-character invocation options (see section 6.1 Invoking Bash).

• Bash has command-line editing (see section 8. Command Line Editing) and the bind builtin.

• Bash provides a programmable word completion mechanism (see section 8.6 Programmable Completion), and two builtin commands, complete and compgen, to manipulate it.

• Bash has command history (see section 9.1 Bash History Facilities) and the history and fc builtins to manipulate it.

• Bash implements csh-like history expansion (see section 9.3 History Expansion).

• Bash has one-dimensional array variables (see section 6.7 Arrays), and the appropriate variable expansions and assignment syntax to use them. Several of the Bash builtins take options to act on arrays. Bash provides a number of built-in array variables.

• The $'...' quoting syntax, which expands ANSI-C backslash-escaped characters in the text between the single quotes, is supported (see section 3.1.2.4 ANSI-C Quoting).

• Bash supports the $"..." quoting syntax to do locale-specific translation of the characters between the double quotes. The `-D', `--dump-strings', and `--dump-po-strings' invocation options list the translatable strings found in a script (see section 3.1.2.5 Locale-Specific Translation).

• Bash implements the ! keyword to negate the return value of a pipeline (see section 3.2.2 Pipelines). Very useful when an if statement needs to act only if a test fails.

• Bash has the time reserved word and command timing (see section 3.2.2 Pipelines). The display of the timing statistics may be controlled with the TIMEFORMAT variable.

• Bash implements the for (( expr1 ; expr2 ; expr3 )) arithmetic for command, similar to the C language (see section 3.2.4 Looping Constructs).

• Bash includes the select compound command, which allows the generation of simple menus (see section 3.2.5 Conditional Constructs).

• Bash includes the [[ compound command, which makes conditional testing part of the shell grammar (see section 3.2.5 Conditional Constructs).

• Bash includes brace expansion (see section 3.5.1 Brace Expansion) and tilde expansion (see section 3.5.2 Tilde Expansion).

• Bash implements command aliases and the alias and unalias builtins (see section 6.6 Aliases).

• Bash provides shell arithmetic, the (( compound command (see section 3.2.5 Conditional Constructs), and arithmetic expansion (see section 6.5 Shell Arithmetic).

• Variables present in the shell's initial environment are automatically exported to child processes. The Bourne shell does not normally do this unless the variables are explicitly marked using the export command.

• Bash includes the POSIX pattern removal `%', `#', `%%' and `##' expansions to remove leading or trailing substrings from variable values (see section 3.5.3 Shell Parameter Expansion).

• The expansion ${#xx}, which returns the length of ${xx}, is supported (see section 3.5.3 Shell Parameter Expansion).

• The expansion ${var:offset[:length]}, which expands to the substring of var's value of length length, beginning at offset, is present (see section 3.5.3 Shell Parameter Expansion).

• The expansion ${var/[/]pattern[/replacement]}, which matches pattern and replaces it with replacement in the value of var, is available (see section 3.5.3 Shell Parameter Expansion).

• The expansion ${!prefix}* expansion, which expands to the names of all shell variables whose names begin with prefix, is available (see section 3.5.3 Shell Parameter Expansion).

• Bash has indirect variable expansion using ${!word} (see section 3.5.3 Shell Parameter Expansion).

• Bash can expand positional parameters beyond $9 using ${num}.

• The POSIX $() form of command substitution is implemented (see section 3.5.4 Command Substitution), and preferred to the Bourne shell's " (which is also implemented for backwards compatibility).

• Bash has process substitution (see section 3.5.6 Process Substitution).

• Bash automatically assigns variables that provide information about the current user (UID, EUID, and GROUPS), the current host (HOSTTYPE, OSTYPE, MACHTYPE, and HOSTNAME), and the instance of Bash that is running (BASH, BASH_VERSION, and BASH_VERSINFO). See section 5.2 Bash Variables, for details.

• The IFS variable is used to split only the results of expansion, not all words (see section 3.5.7 Word Splitting). This closes a longstanding shell security hole.

• Bash implements the full set of POSIX 1003.2 filename expansion operators, including character classes, equivalence classes, and collating symbols (see section 3.5.8 Filename Expansion).

• Bash implements extended pattern matching features when the extglob shell option is enabled (see section 3.5.8.1 Pattern Matching).

• It is possible to have a variable and a function with the same name; sh does not separate the two name spaces.

• Bash functions are permitted to have local variables using the local builtin, and thus useful recursive functions may be written (see section 4.2 Bash Builtin Commands).

• Variable assignments preceding commands affect only that command, even builtins and functions (see section 3.7.4 Environment). In sh, all variable assignments preceding commands are global unless the command is executed from the file system.

• Bash performs filename expansion on filenames specified as operands to input and output redirection operators (see section 3.6 Redirections).

• Bash contains the `<>' redirection operator, allowing a file to be opened for both reading and writing, and the `&>' redirection operator, for directing standard output and standard error to the same file (see section 3.6 Redirections).

• Bash treats a number of filenames specially when they are used in redirection operators (see section 3.6 Redirections).

• Bash can open network connections to arbitrary machines and services with the redirection operators (see section 3.6 Redirections).

• The noclobber option is available to avoid overwriting existing files with output redirection (see section 4.3 The Set Builtin). The `>|' redirection operator may be used to override noclobber.

• The Bash cd and pwd builtins (see section 4.1 Bourne Shell Builtins) each take `-L' and `-P' options to switch between logical and physical modes.

• Bash allows a function to override a builtin with the same name, and provides access to that builtin's functionality within the function via the builtin and command builtins (see section 4.2 Bash Builtin Commands).

• The command builtin allows selective disabling of functions when command lookup is performed (see section 4.2 Bash Builtin Commands).

• Individual builtins may be enabled or disabled using the enable builtin (see section 4.2 Bash Builtin Commands).

• The Bash exec builtin takes additional options that allow users to control the contents of the environment passed to the executed command, and what the zeroth argument to the command is to be (see section 4.1 Bourne Shell Builtins).

• Shell functions may be exported to children via the environment using export -f (see section 3.3 Shell Functions).

• The Bash export, readonly, and declare builtins can take a `-f' option to act on shell functions, a `-p' option to display variables with various attributes set in a format that can be used as shell input, a `-n' option to remove various variable attributes, and `name=value' arguments to set variable attributes and values simultaneously.

• The Bash hash builtin allows a name to be associated with an arbitrary filename, even when that filename cannot be found by searching the $PATH, using `hash -p' (see section 4.1 Bourne Shell Builtins).

• Bash includes a help builtin for quick reference to shell facilities (see section 4.2 Bash Builtin Commands).

• The printf builtin is available to display formatted output (see section 4.2 Bash Builtin Commands).

• The Bash read builtin (see section 4.2 Bash Builtin Commands) will read a line ending in `\' with the `-r' option, and will use the REPLY variable as a default if no non-option arguments are supplied. The Bash read builtin also accepts a prompt string with the `-p' option and will use Readline to obtain the line when given the `-e' option. The read builtin also has additional options to control input: the `-s' option will turn off echoing of input characters as they are read, the `-t' option will allow read to time out if input does not arrive within a specified number of seconds, the `-n' option will allow reading only a specified number of characters rather than a full line, and the `-d' option will read until a particular character rather than newline.

• The return builtin may be used to abort execution of scripts executed with the . or source builtins (see section 4.1 Bourne Shell Builtins).

• Bash includes the shopt builtin, for finer control of shell optional capabilities (see section 4.2 Bash Builtin Commands), and allows these options to be set and unset at shell invocation (see section 6.1 Invoking Bash).

• Bash has much more optional behavior controllable with the set builtin (see section 4.3 The Set Builtin).

• The test builtin (see section 4.1 Bourne Shell Builtins) is slightly different, as it implements the POSIX algorithm, which specifies the behavior based on the number of arguments.

• The trap builtin (see section 4.1 Bourne Shell Builtins) allows a DEBUG pseudo-signal specification, similar to EXIT. Commands specified with a DEBUG trap are executed after every simple command. The DEBUG trap is not inherited by shell functions.

  The trap builtin (see section 4.1 Bourne Shell Builtins) allows an ERR pseudo-signal specification, similar to EXIT and DEBUG. Commands specified with an ERR trap are executed after a simple command fails, with a few exceptions. The ERR trap is not inherited by shell functions.

• The Bash type builtin is more extensive and gives more information about the names it finds (see section 4.2 Bash Builtin Commands).

• The Bash umask builtin permits a `-p' option to cause the output to be displayed in the form of a umask command that may be reused as input (see section 4.1 Bourne Shell Builtins).

• Bash implements a csh-like directory stack, and provides the pushd, popd, and dirs builtins to manipulate it (see section 6.8 The Directory Stack). Bash also makes the directory stack visible as the value of the DIRSTACK shell variable.

• Bash interprets special backslash-escaped characters in the prompt strings when interactive (see section 6.9 Controlling the Prompt).

• The Bash restricted mode is more useful (see section 6.10 The Restricted Shell); the SVR4.2 shell restricted mode is too limited.

• The disown builtin can remove a job from the internal shell job table (see section 7.2 Job Control Builtins) or suppress the sending of SIGHUP to a job when the shell exits as the result of a SIGHUP.

• The SVR4.2 shell has two privilege-related builtins (mldmode and priv) not present in Bash.

• Bash does not have the stop or newgrp builtins.

• Bash does not use the SHACCT variable or perform shell accounting.

• The SVR4.2 sh uses a TIMEOUT variable like Bash uses TMOUT.

More features unique to Bash may be found in 6. Bash Features.