
                   Three-D Athena Widgets (Xaw3d)
                          Kaleb S. KEITHLEY
                         kaleb@opengroup.org


NOTICE:

    This file must be included with any source or binary version of Xaw3d
    or any Xaw-like library based on Xaw3d. If you hack the sources and
    distribute libraries from your hacked sources, you MUST include this
    file as is, without modification, with your libraries. NO EXCEPTIONS.


Features:

    This is Release 1.5 (14 May, 1998) of a set of 3-D widgets based
    on the R6.1/R6.3/R6.4 Athena Widget set.  The Three-D Athena may be
    used as a general replacement for the Athena (Xaw) Widget set.

    In general, you may relink almost any Athena Widget based application
    with the Three-D Athena Widget set and obtain a three dimensional
    appearance on some of the widgets. On systems with shared libraries,
    you can usually replace your shared libXaw with libXaw3d and obtain
    the three dimensional appearance without even relinking.

    Top and bottom shadow colors, shadow width, top and bottom shadow
    contrast should be self explanatory, and may be set via the usual
    and customary methods, e.g. app-defaults, .Xdefaults, programmatically,
    with editres, etc.  The user data resource may be used to "hang"
    application specific data on a widget, and is only settable
    programmatically.


Changes in this release:

    Some bug fixes.


Known problems:

    o You may not be be able to replace shared libXaw with libXaw3d on
      systems with SVR3 style shared libraries.

    o Xaw3d pixel allocation doesn't behave well when beNiceToColormap
      is False and the Default Colormap is full.

    o The samples in Layout.h are wrong and don't work.  Example programs
      written by Keith Packard that use the Layout widget are available
      on ftp://ftp.x.org/R5contrib/Layout.tar.Z

    o The lexer in the Layout widget doesn't work well when a program
      that uses the Layout widget is linked with GNU malloc. This
      is a problem on older releases of Linux, where the libc malloc
      is GNU malloc. It's also a problem on older releases of FreeBSD
      if you have specified "ExtraLibraries -lgnumalloc" in your imake
      config FreeBSD.cf file. (Undoubtedly this is also a problem on the
      other BSDen too, but I don't know this for a fact.) The solution
      for FreeBSD is to delete the ExtraLibraries in your vendor.cf file,
      or edit the Makefile to not link with -lgnumalloc. I don't have a
      solution for Linux users, nor do I have the time (or the inclination)
      to track this down. If you do, and you discover a fix, you're more
      than welcome to send it to me.

    o If your program subclasses Athena's Simple or Sme classes, or
      subclasses thereof, then there's a definite chance that Xaw3d
      isn't source-code compatible with your widgets. Sorry. I have no
      plans to fix this.


Notes on Building Xaw3d Outside an X Source Tree:

    The source is intended to be built inside an R6.[134] source tree.
    You can use an X Consortium source tree (R6.1, R6.3), an X Project
    Team source tree (R6.4), or any XFree86 source tree that corresponds
    to one of the X Consortium or X Project Team source trees.

    You might be able to build it outside the source tree, but if you
    try, (pay attention here) YOU'RE ON YOUR OWN. Don't send me email
    about it. Don't send me email telling me you "...know you're on
    your own, but..." It's hard enough to find time to put out these
    releases, I don't have time for handholding if you choose to
    disregard this advice.

    If you don't have a source tree, for whatever reason, plan on using
    binaries built by someone else. I'm sorry, that's just the way it has
    to be.

    Some people have written to me and told me that if you add the
    following line to the Imakefile:

      EXTRA_INCLUDES=-I.

    then you can build it anywhere you want, i.e. outside the R6 source
    tree. If this works for you, great. If not, see above. To simplify
    things a bit I've already added this line to the Imakefile. Just
    uncomment it (by deleting the '#' at the beginning of the line.


Additions, bug-fixes, improvements, etc.:

    Many people have written to me with enhancements and bug fixes.
    If your enhancement or bug fix didn't make it into this release
    then please understand that I'm very busy with other work and I
    have very little time to devote to Xaw3d. Your enhancement may
    appear in some future release.


xterm:

    A comment that appears in the xterm source:
      *
      * ...There be serious and nasty dragons here.
      *

    xterm is, well, xterm.  The auto-scroll in the arrow-style scrollbar
    doesn't work in xterm because it relies on XtTimeouts.  xterm, perhaps
    in the name of speed, circumvents XtAppNextEvent() and goes direct to
    XNextEvent() to get it's XEvents, with the unfortunate side effect of
    completely ignoring "other sources" like timeouts.  At this time I
    do not have a patch to fix the R6 xterm. There is a patch to the R5
    xterm on ftp://ftp.x.org/contrib/widgets/Xaw3d/R5. It shouldn't be
    hard to integrate it into the R6 sources.


Getting:

    Xaw3d may be found on:

    ftp://ftp.x.org/contrib/widgets/Xaw3d/R6.3/Xaw3d-1.5.tar.gz

    and mirror sites around the world.


Building:

    Untar the distribution from the base of your X Consortium or XFree86
    source tree with the command:

      `gunzip -c Xaw3d-1.5.tar.gz | tar xpf -`

    or (if your system's tar supports the 'z' option)

      `tar xzpf Xaw3d-1.5.tar.gz`


    (PAY ATTENTION HERE: If you don't know where the base of your
    source tree is, don't send me email asking -- I don't know where
    you put it. If you don't know, my guess is that you don't have one.)

    This will create the directory .../xc/lib/Xaw3d.  'cd' there and
    enter the following commands:

      `../../config/imake/imake -I../../config/cf -DTOPDIR=../.. -DCURRENTDIR=lib/Xaw3d`
      `make includes; make depend; make; make install`


Building with Arrow Scrollbars:

    The default Xaw3d does not use arrow scrollbars. The Imakefile
    contains the line:

      #    EXTRA_DEFINES = -DARROW_SCROLLBAR -DUSEGRAY

    If you want the arrow-scrollbar, then uncomment the line by deleting
    the '#'. -DUSEGRAY will do something different with the shadows. If
    you don't want it, edit the line accordingly.

    The Imakefile uses the Xaw symbols in .../xc/config/cf, so if you have
    debugging, profiling, shared libs, etc. specified for Xaw, you'll get
    them in Xaw3d too.


Using:

    Just relink your Xaw based application with -lXaw3d.

    To obtain an appearance similar to another well know widget set, use the
    following resources:
      *background:        LightSkyBlue
      *shapeStyle:        Rectangle
      *beNiceToColormap:  False

    By default, Label widgets do not have shadows drawn for them.  You can
    force shadows to be drawn for specifying:
      *Label*shadowWidth: 2

    If you'd like the default behavior (i.e. not 3-D) on pulldown menus, use:
      *SmeBSB*shadowWidth: 0


Credits (in chronological order of their contribution):

    All the people at the X Consortium

    Achille Hui (eillihca@drizzle.stanford.edu)
    Robert Withrow (witr@rwwa.com)
    Malcolm Strickland (chuck-strickland@orl.mmc.com
    David Flanagan (david@ora.com)
    Jamie Zawinski (jwz@netscape.com)
    Frank Terhaar-Yonkers (fty@bizarre.trpnc.epa.gov)
    Mike Schulze (mike@cs.curtin.edu.au)
    Gustaf Neumann (neumann@mohegan.wi-inf.uni-essen.de)
    Jerry Whelan (guru@stasi.bradley.edu)
    Mark Rawling (mwr@mel.dit.csiro.au)
    Tim Theisen (tim@cs.wisc.edu)
    Mitch Trachtenberg (mitch@mta.com)
    Keith Packard (keithp@ncd.com)
    Dimitrios P. Bouras (dbouras@hol.gr)
    Uri Blumenthal (uri@watson.ibm.com)
    Heiko Schroeder (heiko@pool.informatik.rwth-aachen.de)
